General 4th Axis set up
|
Pool Cue Tapper and Inlay General 4th Axis set up
|
New
KTS-4014 Servo Combo. 40" x 14" of Travel.
Longer Travel (X)40" x (Y)14" x (Z)5.5"
Version 2009 Shaft linear motion servo motors and controller
The new KTS-4014 was designed with the cue makers in mind. The machine has 20mm shafts, anti-backlash nuts, 19 inch material capacity. You can freely cut a length of 40". The long direction T-sloted table top allows for easy adjustment of the tail stock. the machine can accurately position 0.00035" and has a anitbacklash nut.
Please call us for a quote. 714-999-1156
|
Features:
- Standard 5 inches of clearance and 5.5 inches of travel.
- Easy
to assemble. 99% preassembled.
- Wider X axis clearance of 19 inches.
- In-line bearing arrangement on all axis for better longevity.
- 20mm shafts and bearing on al axis.
- All Axis uses Kert Lead screws and Kert Anti-backlash Nuts.
- Rubber
feet.
|
|
Additional Applications:
MDF,
Maple, Balsa, Corian, Circuit Board, Hard Wood, Plastic, non ferrous metals.
Special misting, tools, proper feed rate, proper technique may be required if used to cut aluminum and other non ferrous metals.
Standard Features of the this frame.
 |
X, Y and X axis:
Servo Motors. |
|
 |
20mm shafts on X and Z Only.
16mm shafts on 40" travel axis Y. |
|
 |
Recirculating steel bearings on all axis. |
|
 |
Direct drive coupler with anti-backlash on X and Y axis. |
|
 |
Precision K2 Exclusive aluminum extrusions providing smooth motion. |
|
 |
6061 aircraft grade aluminum. |
|
 |
Anti-Backlash Nuts on all axis.
+ .500" Diameter on X and Z
+ .625" Diameter on Y
+ 0.2
pitch lead screws.
+
14" Axis 250 - ipm Max recommended Traverse. Default setting on Mach from K2.
+
40" Axis 100 ipm Max Traverse. Default setting on Mach from K2.
+ 80IPM Max recommended Feed Rate
+ Backlash:
0.00025 inch
+ Resolution:
0.00035 inch
| INCHES |
METRIC |
| DECIMAL |
mm |
| .00025" |
.00635mm |
| .00050" |
.0127mm |
| .001" |
.0254mm |
| .003" |
.0762mm |
| .006" |
.1524mm |
|
|
 |
Cable Carries
|
 |
Home switches.
+ Used for homing, reference all home.
+ Not used for limiting.
|
|
 |
Machine Travel center of bit:
+ Travel:
X=40" Y=14" Z=5"
|
|
|
Clearance of part:
+
X=47"or longer (table supports 30").
+ Y=19" (side column clearance).
+ Z=5" table top to Z bottom.
+ Z=5.75" No table to Z bottom. |
|
|
Footprint of machine:
+ Machine bottom X=47" Y=35" Z=24.5"
+ Machine top X=47" Y=35" Z=24"
+ with Motor top X=53" Y=38.5" Z=28"
|
|
|
Table Top:
+
X=47"or longer (table supports 30").
+ Y=19" (side column clearance).
|
|
Available router mounts
Trimmer router mounts
 |
Bosch Colt mounts
+ 35K max RPM, great for 1/8 bits.
+ Precision .0005" collect sold by K2CNC. |
 |
Porter Cable 7310 mounts |
 |
Kress mounts
+ 43.18mm (international type)
+
1.7"
|
 |
Rioby Mount
+
1.7"
+ 43.18mm |
 |
RotoZip
+
1.7"
+ 43.18mm |
|
2 HP Router mounts
 |
Porter Cable 892 and 690
+
3.5" diameter, 11" circumference.
+
K2 recommends for 1/4 and 1/2 bits. |
 |
Bosch 1617EVS
+
3.5" |
 |
Hitachi M12VC
+
3.27" |
 |
Mikita RD1101
+
3.20" - 3.22" Diameter. |
 |
Dewalt DW616
+
3.5" |
|
Available routers sold by K2CNC
Trimmer routers
|
Bosch Colt mounts
+ 35K max RPM
+ Precision .0005" collect sold by K2CNC. |
|
2 HP Router
|
Porter Cable 892 and 690
+
3.5" diameter, 11" circumference.
+ Precision .0005" collect sold by K2CNC. |
|
Recommended Features of the KT models at an additional charge.
These are sold outside of this auction and is to be paid separately.
 |
Control Box 3 axis Stepper or servo.
+ E-Stop
+ IO for Relay |
|
 |
Gecko Drive |
|
 |
Table top.
+ .75" thick
+ K2 brand
+ |
|
 |
Mach 3 control software with profile. |
|
 |
Buy a computer with PCI card and Mach3 installed or Drop ship yours for us to install Mach 3, ships with machine. |
|
 |
Grease inlet upgrade. |
|
Available software for machine sold by K2CNC.
These are sold outside of this auction and is to be paid separately.
K2 CNC machines works with all standard G-codes.
CAD software (Computer Aided Design)
 |
RhinoCAD
+ Demo Downloadable
+ Parametric CAD
+ Art CAD with plugin RhinoArt |
 |
VisualMill (Mecsoft)
+ Demo Downloadable
+ Use Visualmill for basic 2D and 3 D drawings.
|
 |
Vectics Carve
+ Demo Downloadable
+ Art CAD |
 |
Vectics Cut 2D
+ Demo Downloadable
+ Art CAD |
 |
Vectics Cut 3D
+ Demo Downloadable
+ Art CAD |
 |
Vectics Aspire
+ Demo Downloadable
+ Art CAD |
|
CAM (Computer Aided Machining)
|
RhinoCam or VisualMill (Mecsoft)
|
|
VisualMill (Mecsoft)
|
|
Vectics Carve
+ Demo Downloadable
+ Art CAD |
|
Vectics Cut 2D
+ Demo Downloadable
+ Art CAD |
|
Vectics Cut 3D
+ Demo Downloadable
+ Art CAD |
|
Vectics Aspire
+ Demo Downloadable
+ Art CAD |
 |
AlibreCam made by Mecsoft.
|
|
Available software for machine sold by 3rd party.
K2 CNC machines works with all standard G-codes.
CAD software (Computer Aided Design)
 |
Alibre
+ Demo Downloadable
+ Parametric CAD |
 |
MasterCam
+ Parametric CAD and Art |
 |
ArtCam
+ Art CAD
|
 |
Type3
|
 |
KCDW Cabinet Software. Use Enroute for easy to use CAM.
|
 |
Enroute
|
 |
BobCAD-CAM
|
 |
Solidworks
|
|
CAM (Computer Aided Machining)
|
AlibreCam made by Mecsoft.
+ Parametric and Art CAM.
|
|
MasterCam
+ Parametric and Art CAM.
|
|
ArtCam
+ Art type of CAM
|
|
Type3
|
|
Enroute
|
|
Enroute
|
|
BobCAD-CAM |
|
SolidCAM
|
|
Optional items for the KT models.
These are sold outside of this auction and is to be paid separately.
|
Aluminum table top.
+ T-sloted for versatility.
|
 |
On/Off relay for router.
+ Prolongs your router life.
+
Works with Mach 3.
|
 |
Toggle clamps.
+ Fast and strong clamping method.
+ Height of approximate 2".
+ Fits with K2 T-sloted top..
|
 |
K2 low profile clamps.
+ Use with a dusthood to avoid crashing into the clamps.
|
|
 |
Colt precision collet.
+ Increase precision a run-out of . 003" or .005" to a .0005" run-out. Ground collets. |
 |
Bits.
1/8th to 1/4. |
|
DustHood. Please call and ask for Ron
+ Fits Bosch Colt mounts
+ Fits Hitachi mounts
+ Fits Makita mounts
+ Fits Dewalt mounts |
 |
Brass 1/8th inch collet holders.
+ Holds 1/8th bits with better accuracy compared to off the shelf adapters.
|
|
Assembly of Machine:
At K2, we test the controller and tolerance prior to shipping out.
It is important that our customers get up and running as soon as possible.
Machine is assembled to 99% unless otherwise instructed by customer.
Machine Warranty:
One year on parts based on an 8 hours per day, 7 days per week operation.
One year on labor at K2CNC location.
Support:
Email - unlimited.
Phone - one basic set up - unlimited.
K2 site - basic mach 3 up to 4 hours.
Visualmill - basic understanding up to 1 hour.
Crating and Handling:
All machines are crated in a wooden pallet and is enclosed with plywood, 2x2 and 2x4.
This ensures that your machine will ge there in one piece.
All machines are insured. |
 |
USA Shipping Estimates: UPS-SCS
Please Add $35 for residence. Prices and specifications subject to change without notice.
Not responsible for typographical errors.
Machine shown with optional equipment.
| KTS-4014 Combo |
| Location |
Zip Code |
Price Estimate |
| New York |
11104 |
225 |
| Washington |
98195 |
205 |
| Michigan |
48532 |
225 |
| Arizona |
85222 |
225 |
| Arizona |
85024 |
155 |
| Florida |
33176 |
228 |
| Washington |
98115 |
215 |
| CA |
93640 |
245 |
| RI |
2861 |
265 |
| TX |
77545 |
265 |
| NY |
11377 |
265 |
| PA |
19072 |
225 |
| Arizona |
85338 |
265 |
| CO |
80112 |
265 |
| IL |
61554 |
285 |
| Utah |
84050 |
285 |
|
|
|
World Wide Shipping Estimates: UPS-SCS
Please Add $35 for residence. Prices and specifications subject to change without notice.
Not responsible for typographical errors.
Machine shown with optional equipment.
| KTS-4014 Combo |
| Location |
Zip Code |
Price Estimate |
| ON |
K1V7H8 |
330 |
| QU |
j0k2n0 |
330 |
| Canada |
G1K4B9 |
330 |
| Canada |
T1W2V4 |
245 |
| Italy |
NA |
645 |
| UK |
NA |
850 |
| Israel |
NA |
850 |
| Australia |
NA |
905 |
| Norway |
4877 |
775 |
| Melbourne Australia |
NA |
795 |
| Switzerland |
NA |
875 |
| Guadalajara |
44230 |
545 |
| Mexico |
36400 |
745 |
|
Please email us and provide your full address and we will be happy to provide you a more accurate shipping charge.
Click here to email us. |
|
_446.jpg)
_446.jpg)
_446.jpg)
_446.jpg)
_446.jpg)
_446.jpg)
_446.jpg)