|
|
Plasma Video (Click Here) |
|
|
|
|
|
| Model |
KV-5050-RP (V-Bearing) |
KG-5050-RP |
KV-5050-RP (V-Bearing) |
KG-5050-RP |
KG-9850-RP |
| Price Range |
K2 CNC $3,900 for frame only.
Buy Controller, Steppers, THC from CandCNC.com for $1,700. K2-Bladerunner-1THC
Estimated Machine, THC, and Controller Starting Around $5600.00 |
K2 CNC $4400 for frame only
Buy Controller, Steppers, THC from CandCNC.com for $1,700. K2-Bladerunner-1THC
Estimated Machine, THC, and Controller Starting Around $6100.00. |
K2 CNC $3900 for frame only.
Buy Controller, Steppers, THC from CandCNC.com for around $2,500. K2-PlazPak-1THC
Estimated Machine, THC, and Controller Starting Around $6,400+
|
K2 CNC $4400 for frame only
Buy Controller, Steppers, THC from CandCNC.com for around $2,500. K2-PlazPak-1THC
Estimated Machine, THC, and Controller Starting Around $7400+ |
K2 CNC $5900 for frame only
Buy Controller, Steppers, THC from CandCNC.com for around $2,500. K2-PlazPak-1THC
Estimated Machine, THC, and Controller Starting Around $8400+ |
| Travel of X and Y |
50" x 50" (1500mm x 1500mm) |
50" x 50" (1500mm x 1500mm) |
50" x 50" (1500mm x 1500mm) |
50" x 50" (1500mm x 1500mm) |
98" x 50" (2800mm x 1500mm) |
| Z high |
6 inches |
6 inches |
6 inches |
6 inches |
6 inches |
| Linear Motion Material |
V Bearing Steel and Steel
|
Rigid Linear Rails - Ground Precision
|
V Bearing Steel and Steel
|
Rigid Linear Rails - Ground Precision
|
Rigid Linear Rails - Ground Precision
|
| Control Box |
Buy from CandCNC.com
CandCNC.com SKU#: K2-Bladerunner-1THC
$2474.75 (-850) = $1624.75
3 Axis Stepper System.
- BladeRunner Controller with 4 blades (4 axis)
- 576W 48V12A Power Supply
- 4ea 600 oz-in 3.5A Hybrid Stepper motors - optimized for the BladeRunner
- Power Supply Enclosure
- AC Commander Card wired (in PS)
- THC Sensor card & cable
- DTHC Expansion Module - Installed
- Full Cable Set
- Compact size, big features. 10" X 7" X 3" (does not include DC Motor Power Supply)
- Built in Remote AC (for Motor Power Supply) control with auto-shutdown on fault
- Front Panel Pulse Monitor shows actual STEP pulses by flashes and DIR by pulse color.
- Front Panel Single Port Input for attachment to PC
- Uses our exclusive UBOB Port S T R E T C H E R technology to give you added I/O.
- More isolated inputs than any other single parallel port solution (9)
- More buffered outputs than any other single parallel port solution (17)
- Unit can be configured from 1 to 4 axis of drives IN THE FIELD. Quik plug BLADE technology
- Runs from 120VAC 50/60HZ or 220VAC 50/60HZ (set at factory)
- Serial interface to PC provides bidirectional multidrop communication with the internal Smart Cards.
- Real Time monitoring of power, load and temperature protects the drives.
- Real time display of actual conditions on a custom MACH Screen (plug-in provided)
- Custom plug and run MACH profiles and Screens.
- Motor cables attach via posi-lock connectors. No crimping, no soldering
- Unit can be expanded to support other options. Mounting for 2nd port card and Hand Controller Input
- Double the speed and 50% more torque available than our earlier Tabletop series
- Driver Blades change out in minutes
- Microstepping, anti-resonance, drives are latest technology
- Plenty of heatsink for cool operation. Internal Fan
|
Buy from CandCNC.com
CandCNC.com SKU#: K2-Bladerunner-1THC
$2474.75 (-850) = $1624.75
3 Axis Stepper System.
- BladeRunner Controller with 4 blades (4 axis)
- 576W 48V12A Power Supply
- 4ea 600 oz-in 3.5A Hybrid Stepper motors - optimized for the BladeRunner
- Power Supply Enclosure
- AC Commander Card wired (in PS)
- THC Sensor card & cable
- DTHC Expansion Module - Installed
- Full Cable Set
- Compact size, big features. 10" X 7" X 3" (does not include DC Motor Power Supply)
- Built in Remote AC (for Motor Power Supply) control with auto-shutdown on fault
- Front Panel Pulse Monitor shows actual STEP pulses by flashes and DIR by pulse color.
- Front Panel Single Port Input for attachment to PC
- Uses our exclusive UBOB Port S T R E T C H E R technology to give you added I/O.
- More isolated inputs than any other single parallel port solution (9)
- More buffered outputs than any other single parallel port solution (17)
- Unit can be configured from 1 to 4 axis of drives IN THE FIELD. Quik plug BLADE technology
- Runs from 120VAC 50/60HZ or 220VAC 50/60HZ (set at factory)
- Serial interface to PC provides bidirectional multidrop communication with the internal Smart Cards.
- Real Time monitoring of power, load and temperature protects the drives.
- Real time display of actual conditions on a custom MACH Screen (plug-in provided)
- Custom plug and run MACH profiles and Screens.
- Motor cables attach via posi-lock connectors. No crimping, no soldering
- Unit can be expanded to support other options. Mounting for 2nd port card and Hand Controller Input
- Double the speed and 50% more torque available than our earlier Tabletop series
- Driver Blades change out in minutes
- Microstepping, anti-resonance, drives are latest technology
- Plenty of heatsink for cool operation. Internal Fan
|
Buy from CandCNC.com
CandCNC.com SKU#: K2-PlazPak-1THC
$2474.75
3 Axis Stepper System.
- 2 ea 740 OZ-IN Hybrid Steppers (1/5" shafts) (34 Frame)
- 1 ea 500 OZ-IN Hybrid Stepper (3/8" shafts) (23 frame)
- ESP650 Enhanced SMART Power Controller w/Dynamic Braking, Overvolts protection,Overload protection, temp monitoring and autoi shutdown
- 3 Gecko 203V "Vampire Drives"
- 2 G-STEP-II Dual Gecko Stepper Interface Cards
- 12X14X6 NEMA Molded case (routed and finished)
- Case Mounting Hardware
- 3 Roller type Home Swtiches
- Home Switch cableing.
- Fan Kit and External Power components
- Big Red E-Stop (lighted) Button
- Complete Cable kit for motors (20' each motor)
- Motor Connectors
- Decals (CandCNC, Gecko, MACH3)
- PSC650 Manual
- MP3000-DTHC Digital THC Combo deal
- MP3000 One port PC interface + DTHC
- Sensor cards and Remote I/O w/aux relays
- Full Cable set (DB25's + DB9)
- MACH3 License
- Support CD w/MACH3 profiles and screens
- Custom Plug-ins for MACH interface to MP3000
- Sample Artwork
- 48 Page Manual
- All electronics mounted, integrated and tested as a unit. Ready to plug and go on arrival.
|
Buy from CandCNC.com
CandCNC.com SKU#: K2-PlazPak-1THC
$2474.75
3 Axis Stepper System.
- 2 ea 740 OZ-IN Hybrid Steppers (1/5" shafts) (34 Frame)
- 1 ea 500 OZ-IN Hybrid Stepper (3/8" shafts) (23 frame)
- ESP650 Enhanced SMART Power Controller w/Dynamic Braking, Overvolts protection,Overload protection, temp monitoring and autoi shutdown
- 3 Gecko 203V "Vampire Drives"
- 2 G-STEP-II Dual Gecko Stepper Interface Cards
- 12X14X6 NEMA Molded case (routed and finished)
- Case Mounting Hardware
- 3 Roller type Home Swtiches
- Home Switch cableing.
- Fan Kit and External Power components
- Big Red E-Stop (lighted) Button
- Complete Cable kit for motors (20' each motor)
- Motor Connectors
- Decals (CandCNC, Gecko, MACH3)
- PSC650 Manual
- MP3000-DTHC Digital THC Combo deal
- MP3000 One port PC interface + DTHC
- Sensor cards and Remote I/O w/aux relays
- Full Cable set (DB25's + DB9)
- MACH3 License
- Support CD w/MACH3 profiles and screens
- Custom Plug-ins for MACH interface to MP3000
- Sample Artwork
- 48 Page Manual
- All electronics mounted, integrated and tested as a unit. Ready to plug and go on arrival.
|
Buy from CandCNC.com
CandCNC.com SKU#: K2-PlazPak-1THC
$2474.75
3 Axis Stepper System.
- 2 ea 740 OZ-IN Hybrid Steppers (1/5 shafts) (34 Frame)
- 1 ea 500 OZ-IN Hybrid Stepper (3/8 shafts) (23 frame)
- ESP650 Enhanced SMART Power Controller w/Dynamic Braking, Overvolts protection,Overload protection, temp monitoring and autoi shutdown
- 3 Gecko 203V "Vampire Drives"
- 2 G-STEP-II Dual Gecko Stepper Interface Cards
- 12X14X6 NEMA Molded case (routed and finished)
- Case Mounting Hardware
- 3 Roller type Home Swtiches
- Home Switch cableing.
- Fan Kit and External Power components
- Big Red E-Stop (lighted) Button
- Complete Cable kit for motors (20' each motor)
- Motor Connectors
- Decals (CandCNC, Gecko, MACH3)
- PSC650 Manual
- MP3000-DTHC Digital THC Combo deal
- MP3000 One port PC interface + DTHC
- Sensor cards and Remote I/O w/aux relays
- Full Cable set (DB25's + DB9)
- MACH3 License
- Support CD w/MACH3 profiles and screens
- Custom Plug-ins for MACH interface to MP3000
- Sample Artwork
- 48 Page Manual
- All electronics mounted, integrated and tested as a unit. Ready to plug and go on arrival.
|
| THC unit |
Buy from CandCNC.com
FEATURES:
- Uses PC based constant velocity MACH3 Software
- Single parallel port solution. No second port card to install/setup/troubleshoot
- 100% Digital Closed Loop Control
- Run with presets or adjust on the fly. On screen "Profiles" to let you setup automatic settings for any type of cutting.
- Control the cut gap (tip volts) on the fly or from a preset
- Full THC features including CV tuning, Response Profile, Head Lock, and Anti-corner Dive settings
- All Parameters are displayed and set from our custom screen menus. You have total control over the way the THC responds and cuts. NO KNOBS to Twist!
- Exclusive Self-test allows instant checking of THC to PC communications and proper THC functions; all at the press of one button.
- Arc Volts Tracking within 1 volt
- Buffered 4.5 channels of Step and Direction (one hardware slaved)
- Opto isolated inputs (all inputs)
- Support for optional tethered Handwheel jog and code scroll (bi-directional)
- Exclusive PORT STRETCHER technology doubles the I/O from one port.
- Isolated Separate inputs for X, Y, Z and A Home Switches
- Up to six optional computer controlled relays for control of external motors, lights, and vacuum systems.
- Input for series connected hard limits
- Input for Panic/Safety Stop Switches
- Table mount I/O card (included) connects to Controller via standard DB25 cable
- LED status indicators on Table I/O card for easy visual checks
- Screen indicators of THC condition status
- Select from Table Presets in MACH3 for instant material changes
- Simple to install. All connections to MP3000-THC are via standard DB 25 or DB 9 cables.
- Unit comes stock with Table I/O Card, AXIS I/O Extension Card (MTA100) and THC Sensor Card
- Two Year Limited Warranty Parts and Labor (Depot only)
- UNLIMITED FREE Support via e-mail and Support Site
|
Buy from CandCNC.com
FEATURES:
- Uses PC based constant velocity MACH3 Software
- Single parallel port solution. No second port card to install/setup/troubleshoot
- 100% Digital Closed Loop Control
- Run with presets or adjust on the fly. On screen "Profiles" to let you setup automatic settings for any type of cutting.
- Control the cut gap (tip volts) on the fly or from a preset
- Full THC features including CV tuning, Response Profile, Head Lock, and Anti-corner Dive settings
- All Parameters are displayed and set from our custom screen menus. You have total control over the way the THC responds and cuts. NO KNOBS to Twist!
- Exclusive Self-test allows instant checking of THC to PC communications and proper THC functions; all at the press of one button.
- Arc Volts Tracking within 1 volt
- Buffered 4.5 channels of Step and Direction (one hardware slaved)
- Opto isolated inputs (all inputs)
- Support for optional tethered Handwheel jog and code scroll (bi-directional)
- Exclusive PORT STRETCHER technology doubles the I/O from one port.
- Isolated Separate inputs for X, Y, Z and A Home Switches
- Up to six optional computer controlled relays for control of external motors, lights, and vacuum systems.
- Input for series connected hard limits
- Input for Panic/Safety Stop Switches
- Table mount I/O card (included) connects to Controller via standard DB25 cable
- LED status indicators on Table I/O card for easy visual checks
- Screen indicators of THC condition status
- Select from Table Presets in MACH3 for instant material changes
- Simple to install. All connections to MP3000-THC are via standard DB 25 or DB 9 cables.
- Unit comes stock with Table I/O Card, AXIS I/O Extension Card (MTA100) and THC Sensor Card
- Two Year Limited Warranty Parts and Labor (Depot only)
- UNLIMITED FREE Support via e-mail and Support Site
|
Buy from CandCNC.com
FEATURES:
- Uses PC based constant velocity MACH3 Software
- Single parallel port solution. No second port card to install/setup/troubleshoot
- 100% Digital Closed Loop Control
- Run with presets or adjust on the fly. On screen "Profiles" to let you setup automatic settings for any type of cutting.
- Control the cut gap (tip volts) on the fly or from a preset
- Full THC features including CV tuning, Response Profile, Head Lock, and Anti-corner Dive settings
- All Parameters are displayed and set from our custom screen menus. You have total control over the way the THC responds and cuts. NO KNOBS to Twist!
- Exclusive Self-test allows instant checking of THC to PC communications and proper THC functions; all at the press of one button.
- Arc Volts Tracking within 1 volt
- Buffered 4.5 channels of Step and Direction (one hardware slaved)
- Opto isolated inputs (all inputs)
- Support for optional tethered Handwheel jog and code scroll (bi-directional)
- Exclusive PORT STRETCHER technology doubles the I/O from one port.
- Isolated Separate inputs for X, Y, Z and A Home Switches
- Up to six optional computer controlled relays for control of external motors, lights, and vacuum systems.
- Input for series connected hard limits
- Input for Panic/Safety Stop Switches
- Table mount I/O card (included) connects to Controller via standard DB25 cable
- LED status indicators on Table I/O card for easy visual checks
- Screen indicators of THC condition status
- Select from Table Presets in MACH3 for instant material changes
- Simple to install. All connections to MP3000-THC are via standard DB 25 or DB 9 cables.
- Unit comes stock with Table I/O Card, AXIS I/O Extension Card (MTA100) and THC Sensor Card
- Two Year Limited Warranty Parts and Labor (Depot only)
- UNLIMITED FREE Support via e-mail and Support Site
|
Buy from CandCNC.com
FEATURES:
- Uses PC based constant velocity MACH3 Software
- Single parallel port solution. No second port card to install/setup/troubleshoot
- 100% Digital Closed Loop Control
- Run with presets or adjust on the fly. On screen "Profiles" to let you setup automatic settings for any type of cutting.
- Control the cut gap (tip volts) on the fly or from a preset
- Full THC features including CV tuning, Response Profile, Head Lock, and Anti-corner Dive settings
- All Parameters are displayed and set from our custom screen menus. You have total control over the way the THC responds and cuts. NO KNOBS to Twist!
- Exclusive Self-test allows instant checking of THC to PC communications and proper THC functions; all at the press of one button.
- Arc Volts Tracking within 1 volt
- Buffered 4.5 channels of Step and Direction (one hardware slaved)
- Opto isolated inputs (all inputs)
- Support for optional tethered Handwheel jog and code scroll (bi-directional)
- Exclusive PORT STRETCHER technology doubles the I/O from one port.
- Isolated Separate inputs for X, Y, Z and A Home Switches
- Up to six optional computer controlled relays for control of external motors, lights, and vacuum systems.
- Input for series connected hard limits
- Input for Panic/Safety Stop Switches
- Table mount I/O card (included) connects to Controller via standard DB25 cable
- LED status indicators on Table I/O card for easy visual checks
- Screen indicators of THC condition status
- Select from Table Presets in MACH3 for instant material changes
- Simple to install. All connections to MP3000-THC are via standard DB 25 or DB 9 cables.
- Unit comes stock with Table I/O Card, AXIS I/O Extension Card (MTA100) and THC Sensor Card
- Two Year Limited Warranty Parts and Labor (Depot only)
- UNLIMITED FREE Support via e-mail and Support Site
|
Buy from CandCNC.com
FEATURES:
- Uses PC based constant velocity MACH3 Software
- Single parallel port solution. No second port card to install/setup/troubleshoot
- 100% Digital Closed Loop Control
- Run with presets or adjust on the fly. On screen "Profiles" to let you setup automatic settings for any type of cutting.
- Control the cut gap (tip volts) on the fly or from a preset
- Full THC features including CV tuning, Response Profile, Head Lock, and Anti-corner Dive settings
- All Parameters are displayed and set from our custom screen menus. You have total control over the way the THC responds and cuts. NO KNOBS to Twist!
- Exclusive Self-test allows instant checking of THC to PC communications and proper THC functions; all at the press of one button.
- Arc Volts Tracking within 1 volt
- Buffered 4.5 channels of Step and Direction (one hardware slaved)
- Opto isolated inputs (all inputs)
- Support for optional tethered Handwheel jog and code scroll (bi-directional)
- Exclusive PORT STRETCHER technology doubles the I/O from one port.
- Isolated Separate inputs for X, Y, Z and A Home Switches
- Up to six optional computer controlled relays for control of external motors, lights, and vacuum systems.
- Input for series connected hard limits
- Input for Panic/Safety Stop Switches
- Table mount I/O card (included) connects to Controller via standard DB25 cable
- LED status indicators on Table I/O card for easy visual checks
- Screen indicators of THC condition status
- Select from Table Presets in MACH3 for instant material changes
- Simple to install. All connections to MP3000-THC are via standard DB 25 or DB 9 cables.
- Unit comes stock with Table I/O Card, AXIS I/O Extension Card (MTA100) and THC Sensor Card
- Two Year Limited Warranty Parts and Labor (Depot only)
- UNLIMITED FREE Support via e-mail and Support Site
|
| Spindle Capacity Industrial 220V |
No |
No |
No |
No |
No |
| Rapid Traverse |
400 IPM |
400 IPM |
700IMP |
700 IPM |
700 IPM |
| Cutting Speed (Feed) IPM |
400 IPM |
400 IPM |
700IMP |
700 IPM |
700 IPM |
| Material Deck |
Standard |
Standard |
Standard |
Standard |
Standard |
| Plasma Capacity |
 |
|
|
|
|
|
|
| |
|
|
