K2 Cabinet machine and partners are providing a low cost solution to your cabinet ventor.

+ Vacuum table and vacuum pump
+ KCDW cabinet and closet sofware
+ ProfileLab and Artcam Insignia
+ Low cost CNC router - High quality parts and services.

Q. How do I bookmark this page that I am on now?
Q. What benefits do I get by registering with K2 CNC? How do I register with K2 CNC?
Q. How do I design the shape or design that I want with the machine?
Q. Should I get the machine right away?
Q. How long does it take to understand the CAM program?
Q. How long does it take to understand the CAD program?
Q. KCDW cabinet software.
Q. Do I need other software other than CAD and CAM?
Q. Does the machine need an enclosure to keep down the noise or contain dust?
Q. How long should my machine last with proper maintenance?
Q. Do I need a Dust Collection system?
Q. Vacuum Table



Q. How do I bookmark this page that I am on now? Adding this site to your list of companies to research will make it easier to comback when needed.
A. It is easy to bookmark this page, all you have to do is CLICK HERE.


Q. What benefits do I get by registering with K2 CNC? How do I register with K2 CNC?
A. A Quick Register will keep you updated on new parts, accessories, upcoming events, and discounts. Become a K2 member. CLICK HERE TO REGISTER


Q. How do I design the shape or design that I want with the machine?
A. You can use a CAD software to create 3D paths, arks, circles, drill holes lines and other paths.

Q. How do I design the shape or design that I want with the machine?
A: Free Evaulation: Fully functional version of Rhino is availible for download. is the same as the commercial version except that it only saves 25 times. After that it is still fully functional except it will not save. It will still work great to learn Rhino and as a viewer for Rhino and many other file formats. Download a demo by clicking here.

Q. If I am new to CNC, CAD and CAM; should I be concerned about getting the machine right away?
A. NO. you will still need to research, understand, and know how to use the CAD and CAM software of your choice prior to the machine arriving at your facility. This may take from 2week to 6 months. It will vary on your knowledge base of computers.

Q. What CAD software should I use?
A. We recommend KCDW cabinet software. This software will alow you to create 3D images of the cabinets to show to your clients. KCDW will export DXF to a Cam software that will than allow you to control the tool path of the bit. CAM software calculates the offset of the diamter of the tools that are used and provide the user a more effectient way of programming compared to write lines of code yourself. Runs about $7500 to $15000. This price will depend on options. Call a represitiive to day at 714-999-1156.

For Art type cutting:
Q. How long does it take to understand the CAD program for cnc routers?
A. Some colleges will offer CAD classes which is very recommended. Takes about 30-60 days to finish the course. Check you local college for more information. You can also download a demo version to see how fast you absorb the interface. RhinoCAD will run you about $600.00. Another great CAD software is "Vizion" ArtCam. ArtCam was used to when producing the Guitar Body that was shown at the NAMM show.

Q. How long does it take to understand the CAM program for cnc routers?
A. Some colleges will offer CAM classes which is very recommended. Takes about 30-60 days to finish the course. Check your local colleges for more information. You can also download a demo version to see how fast you absorb the interface. Download a demo by clicking here. The VisualMill software is about $1000.00 retail but you can also buy it from us our cost to you is only $895.00. Visual Mill and Artcam offer extended training for a fee. Artcam has a 3 day training thru Vizion Technology and VisualMill offers training via phone or internet for a fee also.


Q. Do I need other software other than CAD and CAM?
A. Yes, you will need a G-Code interpreter software like MACH 2 or MACH 3 to be installed onto your computer. This must be installed separately from your CAM and CAD software. Download a demo by clicking here. The difference from a the license version and the demo is the G-Code will max out at 1000 lines of code. This program runs retail about $199.00.


Q. Does the machine need an enclosure to keep down the noise or contain dust?
A. We recommend that you make a box enclosure if you are 3D cutting. Make sure to have the machine in front of you before you construct the enclosure. If you are interested in K2 to build you an enclosure for your machine please call us for more information.

Q. How long should my machine last with proper maintenance?
A. Your machine is made to last a life time. Just because your linear rails are steal you still need to keep you machine maintained by greasing your bearing block and or any other part of it. We recommend one greasing per week or more if running over 8 hours per day. Defects on most parts are warranted for one year. Over 99% of the machines have not needed any replacement parts within or over the one year period.


Q. Do I need a Dust Collection system?
A - NO, but when we tested wood cutting, up to 95% of the wood dust and chips were contained or vacuum into the vacuum systems. We are expected to release a dust vacuum system soon. Please call or email us for more information.

Q. Vacuum System?
A - K2 is currently in development of a vacuum system with high CFM for the cabinet industry.
Rietschle Vacuum Pumps for holding down parts for cnc routers. Starts around $6000 for a 130-150 CFM 13 HP vacuum.