K2 CNC Machines

Controller and Motor Details:
For KT-1414, KT-2514

Picture above is of servo - reference only. Stepper picture comming soon

Up to 4 Steppers Motors
Z uses 275 oz/in of torque, Open loop.
X uses 275 oz/in of torque, Open loop.
Y uses 275 oz/in of torque, Open loop.
Geckodrive Stepper drive.
Step/Dir signals
Wired for Step/Dir signals from Printer Port.
Fully enclosed control box and pre-wired for Parallel Interface.
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
Relay Outlet.
E-Stop outlet
Power Plug.
Fuse.
110V standard USA - 220V International with request!
Mach 2 or Mach 3 Controller software compatible. Profice of machine on CD included with purchase of software.
Mach 2 or Mach 3 Set Up is from K2 CNC with purchase.
Support is from Mach 2 or K2 CNC via email.
Mach 2/3 has a maximum of 4 axis control.

Controller and Motor Details:
For KT-1414-S, KT-2514-S

Up 4 Servo Motors with feedback 1000 line US made encoders.
Z uses 150 oz/in. 25W, 24VDC, 3000 max RPM, 1.5A, Close loop.
X uses 150 oz/in. 25W, 24VDC, 3000 max RPM, 1.5A, Close loop.
Y uses 150 oz/in. 25W, 24VDC, 3000 max RPM, 1.5A, Close loop.
Geckodrive Servo Controller.
Step/Dir signals
Wired for Step/Dir signals from Printer Port.
Uses CAT 5 Plugs for encoders.
Fully enclosed control box and pre-wired for Parallel Interface.
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
Enable button.
Relay Outlet.
E-Stop outlet
Power Plug.
Fuse.
110V standard USA - 220V International with request!
Mach 2 or Mach 3 Controller software compatible. Profice of machine on CD included with purchase of software.
Mach 2 or Mach 3 Set Up is from K2 CNC with purchase.
Support is from Mach 2 or K2 CNC via email.
Mach 2/3 has a maximum of 4 axis control.

Controller and Motor Details:
For KG-1414, KG-2525, KG-3925

Up 4 Servo Motors with feedback 1000 line US made encoders.
Z uses 305 oz/in. 60W, 24VDC, 2800 max RPM, 3.5A, Close loop.
X uses 305 oz/in. 60W, 24VDC, 2800 max RPM, 3.5A, Close loop.
Y bottom uses 305 oz/in. 60W, 24VDC, 2800 max RPM, 3.5A, Close loop.
Geckodrive Servo Controller.
Step/Dir signals
Wired for Step/Dir signals from Printer Port.
Uses CAT 5 Plugs for encoders.
Fully enclosed control box and pre-wired for Parallel Interface.
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
Enable button.
Relay Outlet.
E-Stop outlet
Power Plug.
Fuse.
110V standard USA - 220V International with request!
Mach 2 or Mach 3 Controller software compatible. Profice of machine on CD included with purchase of software.
Mach 2 or Mach 3 Set Up is from K2 CNC with purchase.
Support is from Mach 2 or K2 CNC via email.
Mach 2/3 has a maximum of 4 axis control.

Controller and Motor Details:
For KG-5050, KG-9850, KG12060

4 Servo Motors with feedback 1000 line US made encoders.
Z uses 305 oz/in. 60W, 24VDC, 2800 max RPM, 3.5A, Close loop.
X uses 350 oz/in. 120W, 24VDC, 3000 max RPM, 8.5 A, Close loop.
Y bottom movement uses (2) 350 oz/in. One per side of the frame in tandem. 120W, 24VDC, 3000 max RPM, 8.5 A, Close loop.
Geckodrive Servo Controller.
Step/Dir signals
Wired for Step/Dir signals from Printer Port.
Uses CAT 5 Plugs for encoders.
Fully enclosed control box and pre-wired for Parallel Interface.
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
Enable button.
Relay Outlet.
E-Stop outlet
Power Plug.
Fuse.
110V standard USA - 220V International with request!
Mach 2 or Mach 3 Controller software compatible. Profice of machine on CD included with purchase of software.
Mach 2 or Mach 3 Set Up is from K2 CNC with purchase.
Support is from Mach 2 or K2 CNC via email.
Mach 2/3 has a maximum of 4 axis control.