50 x 50 travel CNC Router - Plasma Ready - Machine has 50 x 50 travel.

Update 7/8/06

KG-5050-EB (4 Axis controller required)
This Model has 2 motor and ballscrews on bottom Axis.
Welded legs are at an additional charge.

There are several ways you can get a price quote.

Overview of features of the KG-5050

Footprint without motor:

Footprint (overall size not including motors): 66" x 61" x 21"

Dimensions with motor:

Footprint (overall size not including motors):X=70" x Y=61" x 27". Dimensions may change without notice.

Travel or Cutting dimension:

Travel: X-50" Y-50" (Z-5" to 12")

Table Top:

Travel: X-54" Y-48"

Frame Features:

Structure is CNC machined 6061 aluminum
Aluminum Extrusions
6061 Billet Machined Aluminum
Precision Ground Aluminum 6061 on critical parts.
X and Y Axis uses 20mm ABBA Linear Rails and Blocks (4 Blocks for X and 2 for Y)
Feet included a plate for attaching to your table(10-32 Screw thru hole).

Ball Screw X and Y. X has 2 ballscrews on the side of the frame.

Backlash Tolerance of +-.001 inch.
Repeatability of +-.001 inch.
Resolution is .0001 inch.
Rapid Traverse is 300 inches per minute.
Feed rate is dependent on the materail.
X uses close loop servo motors. 2:1 Ratio Pulley with reinforced belts.
Y uses close loop servo motors. 2:1 Ratio Pulley with reinforced belts.
Custom feed rate is availbie upon request. Please call us and ask for Kevin

INCHES	METRIC
DECIMAL	mm
.00025"	.00635mm
.00050"	.0127mm
.001"	.0254mm
.003"	.0762mm
.006"	.1524mm

Z Axis-Linear Rail System.

Linear Rigid Rails with recirculation ball bearings.
Ballscrews .001 backlash tolerance.
Resolution is .0001 inch.
2:1 Ratio pulley and reinforced belt.
Linear Bearings

3 axis Linear Rail System.
This is on both the rack and pinion and the ballscrew models.

Most Accurate Cutting Z Axis
Heavy load
Sealed
Longer Lasting
High rigidity
Low axis motion noise
High durability
Low maintenance

Cable Carriers

Easy to snap in additional wires.
Add your extension cord for your spindle.

Connectors that comes with controller:

Parallel Printer Cable for controls (Currently No USB)
USB for Power
Power Cord for 110 V AC

Cut Capacity/Material:

Most non-ferrus meterials.
Corian
Plastic
Foam
Wood
Circuit Board
Light Aluminum

Assembly:

Est of 40-120 min with two people.
Wires pre-installed

On a turn-key machine these are the options that you may need as items to make your first cut. These items are NOT included or available thru K2CNC.

Vacuum Table - Not available thru K2
A vise or Fixture to hold part - Not available thru K2
Your Cutting Program - Not available thru K2
Cutting Tool is optional and some size are aviliable.

Support includes:

Email (Unlimited)
Phone (2 hours assembly/controller)
Controller software support (Email from Mach2)
CAD Support (Email, Phone, Fax from VisualMill or ARtcam)
On site support is available at an additional charge.

Warranty:

12 Months on all parts that are defective.

Returns:

15 days to return machine. Motors and controller can be used but not damaged. 100% Money Back on machine, motors and controller less Shipping and handling.

KG-5050 Option Details:
YOU CAN CUSTOMIZE YOUR MACHINE.
CLICK HERE TO GET A QUOTE HERE

Dell Computer, VisualMill and Mach 2 Details:

Dell Computer Requirements.	VisualMill - Rhino ArtCam CAD/CAM Software	Mach 2 Control Software.
Window XP or 2000 Processor (1.00GHz) or greater. Memory 256MB DDR SDRAM at Hard Drive 20GB USB Parellell port on mother board or PCI slot. All background software to be removed from computer.	CD, Manual, Hard Key Support from VisualMill Support from Rhino CAM Mach 2 and CAM soft must be on separate computers. No print instructions or manual thru K2	Mach 2 CD or download from Mach 2 site. Set Up is from K2 CNC Support from Mach 2 Mach 2 and CAM soft must be on separate computers. No print instructions or manual thru K2 Manual will be on a CD in PDF format. K2 machine settings will be provided.

CAD	CAM	Control Software
Rhino CAD ArtCam Pro ArtCam Insignia KCDW Profile Lab To see more click here.	Rhino CAM VisualMill ArtCam ArtCam Insignia Profile Lab To see more click here.	Mach2 or Mach3 CD or download from Mach2 site. Mach Profile of machine. Set Up is from K2 CNC. Support from Mach2.

Z Axis Details:

5" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 5" (Recommended).
8" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 8".
12" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 12".

Limit Switches Details:

Used for Homing, Zeroing X, Y and Z.
Pre-Wired
Made of micro switches

Spindle Router Details:

Porter Cable 892 - 2.25HP - NEW Tool Changing easier than Hitachi (Single Tool Changer)
NEW* Bosch - 2.25hp - 1617 motor (3.5in diameter) - Please make verbal or email request for this model.
Hitachi 2.25 HP
Makita 2.25 HP

Spindle Router Mount Details:

Porter Cable 690LR or 892 router (should fit most routers with 3.5" round body)
NEW* Bosch - 1617 motor (3.5in diameter)
Hitachi (3.27 in diameter)
Makita (3.22 in diameter)
**Industrial spoindles** Colombo 3- 5 horse power - Manual tool change
**Industrial spoindles** HSD 3 - 5 horse power - Manual tool change.

Spindle Dust hood Details:

Collects dust and small chips.
Fits 2.25" diameter hose.
Vacuum and Hoses are NOT included
Collects approximately 80% of cut debris

Jet Brand dust collection system

650 CFM
1150 CFM

Table Top Details:

Aluminum Table top size: 58" x 48" x .1875" - 1/4-20 Tap every 3 inches
Wood Table top size: 58" x 48" - Recommended 2 ply of .75" thick High density MDF- 2 T-Slot rails made of Aluminum (Not available)
7/31/06 - Currently working on low leakage vacuum for mdf and plasic applications.

Servo and Controller Details:

4 Servo Motors with feedback 1000 line US made encoders.
Z uses 305 oz/in. 60W, 24VDC, 2800 max RPM, 3.5A, Close loop.
X uses 350 oz/in. 120W, 24VDC, 3000 max RPM, 8.5 A, Close loop.
Y bottom 98 movement uses (2) 350 oz/in. One per side of the frame in tandem. 120W, 24VDC, 3000 max RPM, 8.5 A, Close loop.
Geckodrive Servo Controller.
Wired for Step/Dir signals from Printer Port.
Uses CAT 5 Plugs for encoders.
Fully enclosed control box and pre-wired for Parallel Interface.
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
5 watt power input wire from computer USB port.
Enable button.
Power Plug.
Fuse.
110V standard USA - 220V International with request!
Mach 2 Controller software CD with purchase or download demo from Mach 2 site.
Mach 2 Set Up is from K2 CNC with purchase.
Support is from Mach 2 via email.
Mach 2/3 has a maximum of 4 axis control.

Cable Carriers on X and Y Axis:

Allow for motor wires, limit switches and encoder wires.
Keep the wire neat and out of the way.

Table Frame Legs:(Welded legs are at an additional charge.)

Welded steel (2" x 2" square tubing)
Painted Gray.
Adjustments on feet.
Additional charges for Shipping

Shipping and Handling:

Requires Pallet Delivery
Typical Company: UPS (United Parcel Services) Residential or Business. Delivery to the door.
Pallet is made of 11/32" thick plywood and 2x2 wood brace framing.
Additional charges may apply for residential delivery
Forklift is required to unload from delivery truck.
Total weight is approx. 350 LBS
Customer is responsible for removing box from delivery truck
International Shipping is available at additional charges - Please call for details.

Warranty Policy: 12 Months on all parts that are defective.

Satisfaction Guarantee Policy: 15 days to return machine. Motors and controller can be used but not damaged. 100% Money Back less shipping and handling on machine, motors and controller.

Assembly: Some assembly required. Due to the constant improved modifications to our machines, assembly instructions of all machines are provided over the phone or by email only.