This
machine will cut wood, plastic, foam. Material height max
of 5 inches. It's rapid movement will allow you to rapid
to the next hole cut location and save time. The control
box will run off of Mach3 with ISO G-code. Equipped with
K2 Servo set up the strong 305 oz/in motors will cut many
types of materials. True 2D, 2.5D and 3D cutting from profiles
to 3D molds.
Machine
Features :
+
Rigid Linear Rails and recirculating bearings.
+ Welded Frame
+ Rack and Pinion
+ Plasma compatible
+ Servo System - close loop - encoder.
+ Home switches.
+ Gecko Drive controller
+ Table top ready
There
are several ways you can get a price quote.
Footprint
without motor:
Footprint
(overall size not including motors): 66" x
61" x 21"
Dimensions
with motor:
Footprint
(overall size not including motors):X=70" x
Y=61" x 27". Dimensions may change without
notice.
Travel
or Cutting dimension:
Travel:
X-50" Y-50" (Z-5")
Table
Top:
Area:
X-54" Y-48"
Frame
Features:
Rack
and pinion motion.
Structure
is CNC machined 6061 aluminum and extrusions
6061
Billet Machined Aluminum Parts
Linear
motion sides uses 20mm ABBA Linear Rails and Blocks
(2 Blocks)
Gantry uses one 20mm ABBA Linear Rails and Block.
Feet
included a plate for attaching to your table(10-32
Screw thru hole).
Rack and Pinion X and Y (This
is the Standard Option):
Tolerance
of .006
Repeatability
of .006
Rapid
Traverse is 500 inches per minute.
Feed
rate is 250 inches per minute.
Custom
feed rate is available upon request. Please call
us and ask for Kevin.
Gear
ratio is 4:1
Gear
material is aluminum and steel.
Z Axis.
Linear
Hardened Shaft Guides
Linear
Bearings Blocks with grease inlet.
Rolled
Ballscrews .001 Backlash.
Recuirulating
ball nut with grease inlet.
Belt
Drive geared down for power and accuracy.
5"
Travel
Standard
X and Y Axis uses 20mm ABBA Brand linear rails/blocks
3 axis Linear Rail System.
This is on both the rack and pinion and the ballscrew
models.
Most
Accurate Cutting Z Axis
Heavy
load
Sealed
Longer
Lasting
High rigidity
Low axis motion noise
High durability
Low
maintenance
Connectors
that comes with controller:
Parallel
Printer Cable for controls (Currently No USB)
USB
for Power
Power
Cord for 110 V AC
International
Power Cord for 220 VAC (Please request)
Cut
Capacity/Material:
Plastic
Foam
Wood
Circuit
Board
Light
Aluminum
Assembly:
The
machine is pre assembled to 100% tested and disassembled
to95%.
Est
of 40-120 min with two people.
On
a turn-key machine these are the options that you may
need as items to make your first cut. These items are
NOT included or available thru K2CNC.
A
vise or Fixture to hold part - Not available thru
K2
Your
Cutting Program - Not available thru K2
Plasma
Cutter.
Support
includes:
Email
(Unlimited)
Phone
(2 hours assembly/controller)
CAM
support (Email from Mach2)
CAD
Support (Email, Phone, Fax from Visual)
On
site support is available at an additional charge.
Plasma
features:
Motion
system location is off to the side and makes plasma
cutting possible by removing the brace and anchoring
the frame to your welded frame.
Must
state that you are planning on using the machine
for plasma. Additional brackets may be needed for
your application.
*Plasma
cutter, jigs, ribs plasma cutters are not provided
by K2.
Plasma
Mounts are available.
Motion
system location make plasma cutting possible with
added options.
Warranty:
12
Months on all parts that are defective.
Returns:
15
days to return machine. Motors and controller can
be used but not damaged. 100% Money Back on machine,
motors and controller less Shipping and handling.
KG-5050P
Option/Details:
CAD,
CAM and Control Software:
Dell
Computer Requirements.
VisualMill
- Rhino ArtCam
CAD/CAM Software
Mach
2 Control Software.
Window
XP or 2000
Processor
(1.00GHz) or greater.
Memory
256MB DDR SDRAM at
Hard Drive 20GB
USB
Parallel
port on mother board or PCI slot.
All background software to be removed from
computer.
CD,
Manual, Hard Key
Support
from VisualMill
Support
from Rhino CAM
Mach
2 and CAM soft must be on separate computers.
No
print instructions or manual thru K2
Mach
2 CD or download from Mach 2 site.
Set
Up is from K2 CNC
Support
from Mach 2
Mach
2 and CAM soft must be on separate computers.
5" Travel, comes with Rigid Rails and Ballscrew
of .001 inch backlash tolerance, Clearance of 5"
(Recommended).
Limit
Switches Details:
Used
for Homing, Zeroing X, Y and Z.
Pre-Wired
Made
of micro switches
Servo
Controller Details:
3
to 4 Servo Motors with feedback encoders.
Geckodrive
G320 servo controller
Wired for Step/Dir signals from Printer Port
Fully enclosed control box and pre wired for Parallel
Interface
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
5
watt power input wire from computer USB port.
Enable
button
Power
Plug
Fuse
Mach
2 Controller software settings CD with purchase
or download demo from Mach 2 site.
Mach
2 Set Up assistance is from K2 CNC with purchase
Support
is from Mach 2 via email or from K2.
Servo Motors:
X
and Y Axis
Z
Axis
2
Servo Motors DC X and Y
Strength
- 305 oz/in torque
US
Digital Encoder for Servos.
Servo Motors DC X and Y
Strength
- 305 oz/in torque
US
Digital Encoder for Servos.
Table
Frame Legs:(Welded legs are a part of this
machine and are included)
Welded
steel (Mainly 2" x 2" square tubing)
Powder coated gray.
Adjustments
on feet.
Shipping
and Handling:
Requires
Pallet Delivery
Typical
Company: UPS (United Parcel Services) Residential
or Business. Delivery to the door.
Pallet
is made of 11/32" thick plywood and 2x2 wood
brace framing.
Additional
charges may apply for residential delivery
Forklift
is required to unload from delivery truck.
Total
weight is approximate. 350 LBS
Customer
is responsible for removing box from delivery truck
International
Shipping is available at additional charges - Please
call for details.
Warranty
Policy: 12 Months on all parts that are defective.
Satisfaction Guarantee Policy: 15 days to return machine. Motors
and controller can be used but not damaged. 100% Money Back less shipping and
handling on machine, motors and controller.
Assembly:Some assembly required. Due to the constant improved
modifications to our machines, assembly instructions of all machines are provided
over the phone or by email only.
