50 x 50 travel CNC Router - Plasma Ready - Machine has 50 x 50 travel.

KG-5050-R (Rack and Pinion Style Frame)
Welded legs are at an additional charge.

There are several ways you can get a price quote.

Overview of features of the KG-5050

Footprint without motor:

Footprint (overall size not including motors): 66" x 61" x 21"

Dimensions with motor:

Footprint (overall size not including motors):X=70" x Y=61" x 27". Dimensions may change without notice.

Travel or Cutting dimension:

Travel: X-50" Y-50" (Z-5" to 12")

Table Top:

Travel: X-54" Y-48"

Frame Features:

Structure is CNC machined 6061 aluminum and extrusions
6061 Billet Machined Aluminum
Precision Ground Aluminum 6061 on critical parts.
X and Y Axis uses 20mm ABBA Linear Rails and Blocks (4 Blocks for X and 2 for Y)
Feet included a plate for attaching to your table(10-32 Screw thru hole).

Rack and Pinion X and Y
(This is the Standard Option):

Tolerance of .006
Repeatability of .006
Rapid Traverse is 500 inches per minute.
Feed rate is 250 inches per minute.
Custom feed rate is available upon request. Please call us and ask for Kevin.
Gear ratio is 4:1
Gear material is nylon and steel.

INCHES	METRIC
DECIMAL	mm
.00025"	.00635mm
.00050"	.0127mm
.001"	.0254mm
.003"	.0762mm
.006"	.1524mm

Z Axis-2 Shaft.
(Standard)

Standard
1/2" Diameter- 10 turn (0.1" pitch) Stainless Steel Acme Lead screws
Anti-backlash Acetal Nut (Spring loaded)
2 1/2" Diameter Linear Hardened Shaft Guides

3 axis Linear Rail System.
This is on both the rack and pinion and the ballscrew models.

Most Accurate Cutting Z Axis
Heavy load
Sealed
Longer Lasting
High rigidity
Low axis motion noise
High durability
Low maintenance

Connectors that comes with controller:

Parallel Printer Cable for controls (Currently No USB)
USB for Power
Power Cord for 110 V AC
International Power Cord for 220 VAC (Please request)

Cut Capacity/Material:

Plastic
Foam
Wood
Circuit Board
Light Aluminum

Assembly:

Est of 40-120 min with two people.

On a turn-key machine these are the options that you may need as items to make your first cut. These items are NOT included or available thru K2CNC.

Vacuum Table - Not available thru K2
A vise or Fixture to hold part - Not available thru K2
Your Cutting Program - Not available thru K2
Cutting Tool (End Mill or Drill Bit) - Not available thru K2

Support includes:

Email (Unlimited)
Phone (2 hours assembly/controller)
CAM support (Email from Mach2)
CAD Support (Email, Phone, Fax from Visual)
On site support is available at an additional charge.

Plasma features:

motion system location is off to the side and makes plasma cutting possible by removing the brace and anchoring the frame to your welded frame.
Must state that you are planning on using the machie for plasma. Additional brackets may be need for your application.
*Plasma cutter, jigs, ribs plasma cutters are not provided by K2.
Plasma Mounts are availible.
motion system location make plasma cutting possible with added options.

Warranty:

12 Months on all parts that are defective.

Returns:

15 days to return machine. Motors and controller can be used but not damaged. 100% Money Back on machine, motors and controller less Shipping and handling.

KG-5050-R Option/Details:
E

CAD, CAM and Control Software:

Dell Computer Requirements.	VisualMill - Rhino ArtCam CAD/CAM Software	Mach 2 Control Software.
Window XP or 2000 Processor (1.00GHz) or greater. Memory 256MB DDR SDRAM at Hard Drive 20GB USB Parellell port on mother board or PCI slot. All background software to be removed from computer.	CD, Manual, Hard Key Support from VisualMill Support from Rhino CAM Mach 2 and CAM soft must be on separate computers. No print instructions or manual thru K2	Mach 2 CD or download from Mach 2 site. Set Up is from K2 CNC Support from Mach 2 Mach 2 and CAM soft must be on separate computers. No print instructions or manual thru K2 Manual will be on a CD in PDF format. K2 machine settings will be provided.

CAD	CAM	Control Software
Rhino CAD ArtCam Pro ArtCam Insignia KCDW Profile Lab To see more click here.	Rhino CAM VisualMill ArtCam ArtCam Insignia Profile Lab To see more click here.	Mach2 or Mach3 CD or download from Mach2 site. Mach Profile of machine. Set Up is from K2 CNC. Support from Mach2.

Z Axis Details:

5" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 5" (Recommended).
8" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 8".
12" Travel, comes with Rigid Rails and Ballscrew of .001 inch backlash tolerance, Clearance of 12".

Limit Switches Details:

Used for Homing, Zeroing X, Y and Z.
Pre-Wired
Made of micro switches

Spindle Router Details:

Porter Cable 892 - NEW The Tool Changing, easier than Hitachi
PC 7518 - 3hp
Hitachi - 2.25hp
Makita - 2.25 hp
Bosch - 2.25 hp
Colombo - 3-5hp Industrial spindle
HSD - 5 hp toolchanger

Spindle Router Mount Details:

Porter Cable (690LR or 892 router (should fit most routers with 3.5" round body)
PC 7518
Hitachi (3.27 in diameter)
Makita (3.22 in diameter)
Bosch (3.5 inch diamter)
Colombo
HSD

Table Top Details:

Aluminum Table top size: 58" x 48" x .1875" - 1/4-20 Tap every 3 inches
Wood Table top size: 58" x 48" - Recommended 2 ply of .75" thick High density MDF- 2 T-Slot rails made of Aluminum (Not available)
7/31/06 - Currently working on low leakage vacuum for mdf and plasic applications.

Servo and Controller Details:

4 Servo Motors with feedback 1000 line US made encoders.
Z uses 305 oz/in. 60W, 24VDC, 2800 max RPM, 3.5A, Close loop.
X uses 350 oz/in. 120W, 24VDC, 3000 max RPM, 8.5 A, Close loop.
Y bottom 98 movement uses (2) 350 oz/in. One per side of the frame in tandem. 120W, 24VDC, 3000 max RPM, 8.5 A, Close loop.
Geckodrive Servo Controller.
Wired for Step/Dir signals from Printer Port.
Uses CAT 5 Plugs for encoders.
Fully enclosed control box and pre-wired for Parallel Interface.
Watts power supply. 24VDC unregulated (~30V) 8 Amps.
5 watt power input wire from computer USB port.
Enable button.
Power Plug.
Fuse.
110V standard USA - 220V International with request!
Mach 2 Controller software CD with purchase or download demo from Mach 2 site.
Mach 2 Set Up is from K2 CNC with purchase.
Support is from Mach 2 via email.
Mach 2/3 has a maximum of 4 axis control.

Cable Carriers on X and Y Axis:

Allow for motor wires, limit switches and encoder wires.
Keep the wire neat and out of the way.

Table Frame Legs:(Welded legs are at an additional charge.)

Welded steel (2" x 2" square tubing)
Painted Gray.
Adjustments on feet.
Additional charges for Shipping

Shipping and Handling:

Requires Pallet Delivery
Typical Company: UPS (United Parcel Services) Residential or Business. Delivery to the door.
Pallet is made of 11/32" thick plywood and 2x2 wood brace framing.
Additional charges may apply for residential delivery
Forklift is required to unload from delivery truck.
Total weight is approximate. 350 LBS
Customer is responsible for removing box from delivery truck
International Shipping is available at additional charges - Please call for details.

Warranty Policy: 12 Months on all parts that are defective.

Satisfaction Guarantee Policy: 15 days to return machine. Motors and controller can be used but not damaged. 100% Money Back less shipping and handling on machine, motors and controller.

Assembly: Some assembly required. Due to the constant improved modifications to our machines, assembly instructions of all machines are provided over the phone or by email only.