| Footprint |
- Footprint
(overall size not including motors):X=66" x
Y=65". Dimensions may change without
notice.
|
| Travel
or Cutting dimension: |
- Travel:
X-50" Y-50" (Z-3")
|
| Table
Top: |
|
| Home Switches Details: |
- Used
for Homing, Zeroing X, Y and Z.
- Made
of micro switches on Z axis
- Made
of industrial grade sealed Honeywell switches.
|
Z Axis-2 Shaft.
(Standard) |
- Standard 6 inch travel floating head.
- Floating head feature used with Sheetcam G28 to sero part height and where to start Z height plasma THC.
- 20mm Shafts and recirculting bearing.
- K2 Style 1/2"
Diameter- 10 turn (0.1" pitch) Stainless Steel
Acme Lead screws
- Anti-backlash
Acetal Nut (Spring loaded)
|
Rack and Pinion X and Y
(This
is the Standard Option): |
- Tolerance
of .006" to .015".
- Repeatability
of .006" to .015".
- Rapid
Traverse is 800 inches per minute.
- recommended feed
rate for cutting is 400 inches per minute.
- Custom
feed rate is available upon request. Please call
us and ask for Kevin.
- Gear
ratio profile setting for Mach3 included.
|
INCHES |
METRIC |
|
DECIMAL |
mm |
| .00025" |
.00635mm |
| .00050" |
.0127mm |
| .001" |
.0254mm |
| .003" |
.0762mm |
| .006" |
.1524mm |
|
| Control Box:CandCNC.com |
Buy from CandCNC.com
CandCNC.com SKU#: K2-PlazPak-1THC
$2474.75 from CandCNC.com
3 Axis Stepper System.
- 2 ea 740 OZ-IN Hybrid Steppers (1/5" shafts) (34 Frame)
- 1 ea 500 OZ-IN Hybrid Stepper (3/8" shafts) (23 frame)
- ESP650 Enhanced SMART Power Controller w/Dynamic Braking, Overvolts protection,Overload protection, temp monitoring and autoi shutdown
- 3 Gecko 203V "Vampire Drives"
- 2 G-STEP-II Dual Gecko Stepper Interface Cards
- 12X14X6 NEMA Molded case (routed and finished)
- Case Mounting Hardware
- 3 Roller type Home Swtiches
- Home Switch cableing.
- Fan Kit and External Power components
- Big Red E-Stop (lighted) Button
- Complete Cable kit for motors (20' each motor)
- Motor Connectors
- Decals (CandCNC, Gecko, MACH3)
- PSC650 Manual
- MP3000-DTHC Digital THC Combo deal
- MP3000 One port PC interface + DTHC
- Sensor cards and Remote I/O w/aux relays
- Full Cable set (DB25's + DB9)
- MACH3 License
- Support CD w/MACH3 profiles and screens
- Custom Plug-ins for MACH interface to MP3000
- Sample Artwork
- 48 Page Manual
- All electronics mounted, integrated and tested as a unit. Ready to plug and go on arrival.
|
| Plasma
THC (Torch Height Control): |
Buy from CandCNC.com
FEATURES:
- Uses PC based constant velocity MACH3 Software
- Single parallel port solution. No second port card to install/setup/troubleshoot
- 100% Digital Closed Loop Control
- Run with presets or adjust on the fly. On screen "Profiles" to let you setup automatic settings for any type of cutting.
- Control the cut gap (tip volts) on the fly or from a preset
- Full THC features including CV tuning, Response Profile, Head Lock, and Anti-corner Dive settings
- All Parameters are displayed and set from our custom screen menus. You have total control over the way the THC responds and cuts. NO KNOBS to Twist!
- Exclusive Self-test allows instant checking of THC to PC communications and proper THC functions; all at the press of one button.
- Arc Volts Tracking within 1 volt
- Buffered 4.5 channels of Step and Direction (one hardware slaved)
- Opto isolated inputs (all inputs)
- Support for optional tethered Handwheel jog and code scroll (bi-directional)
- Exclusive PORT STRETCHER technology doubles the I/O from one port.
- Isolated Separate inputs for X, Y, Z and A Home Switches
- Up to six optional computer controlled relays for control of external motors, lights, and vacuum systems.
- Input for series connected hard limits
- Input for Panic/Safety Stop Switches
- Table mount I/O card (included) connects to Controller via standard DB25 cable
- LED status indicators on Table I/O card for easy visual checks
- Screen indicators of THC condition status
- Select from Table Presets in MACH3 for instant material changes
- Simple to install. All connections to MP3000-THC are via standard DB 25 or DB 9 cables.
- Unit comes stock with Table I/O Card, AXIS I/O Extension Card (MTA100) and THC Sensor Card
- Two Year Limited Warranty Parts and Labor (Depot only)
- UNLIMITED FREE Support via e-mail and Support Site
|
| Cut
Capacity/Material: |
- Dependent on your plasma cutter.
|
| Assembly: |
- Machine comes fully assembled USA.
- Customer must install motors, wires and connect electronics.
|
| Support
includes: |
- Support on software and electronics is by www.candcnc.com (any item purchased fromCandCNC.com).
- K2 will support on anything machanical.
|
| Plasma
Cutters : |
- Hypertherm Machine Torch (Not included in price can be added on)
|
| Plasma
Table Tops: |
- 3” x .125 steel flats bars.129” thick spaced about 3.80” apart. Covers area of 60" x 60"(comes set in bracket for easy removal and replacement of steel slats)
|
| Cable
Carriers on X Axis only: |
- Allow
for motor wires, limit switches and encoder wires.
- Keep
the wire neat and out of the way.
- Wire
suspensions - holds wires and plasma cable above
the table and part.
|
| Table
Frame Legs:(Welded legs are a part of this
machine and are included) |
- Welded
steel (Mainly 2" x 2" square tubing)
- Painted Black.
- Adjustments
on feet.
|
| Warranty: |
- 12
Months on all parts that are defective.
|
| Returns: |
- 15
days to return machine. Motors and controller can
be used but not damaged. 100% Money Back on machine,
motors and controller less Shipping and handling.
|
| Shipping
and Handling: |
- Requires
Pallet Delivery
- Typical
Company: UPS Supply Chain Solutions (adivision of United Parcel Services) Residential or Business. Delivery to the door.
- Pallet
is made of 11/32" thick plywood and 2x2 wood
brace framing.
- Additional
charges may apply for residential delivery
- Forklift
is required to unload from delivery truck.
- Total
weight is approximate. 450 LBS
- Customer
is responsible for removing box from delivery truck
- International
Shipping is available at additional charges - Please
call for details.
|
