$10,792.00 (Reference #3511) Price subject to change without notice.
This
machine is perfect for those who are lacking space, who
product parts as a hobby to production of parts that is
39 inches by 25 inches. It's low price makes this a great
size machine.
Below is a list of what is included in this package.
-CNC Router Machine Frame - X - Y - Z Axis includes High Tolerance ABBA Rolled Ballscrews with (.001” or .0254mm Backlash), Precision High tolerance Rigid ABBA Brand Rigid 20mm Rails with recalculating bearing blocks and Ballscrews. Frame does not come with table top. Included is the 5 inch travel and clearance on Z axis. Includes pulleys, belts, grease inlet. Travel 39” x 25” inches (635mm x 635mm).
-(3) Axis Controller Gecko Drive, (3) 305 oz/in Close Loop Servos with 1000 line Encoder, Wires with Cat 5 plugs, (parallel, USB, Power cord), E-stop hardware with 4 feet length wire, Home Switches, and Cable Carriers. (Newly added relay output only. This is controlled by Mach2 - Mach3 using M codes *Does not include the On/Off Router spindle relay hardware – sold at an additional charge*), Standard 110 V can be made to 220 V with no added cost (customer must request).
-Z-Axis Upgrade to Rigid Linear Rails (8") with High Tolerance Ballscrews (.001 Tolerance.)
-Aluminum Table Top T-Slotted. (Sectional top. Each is 0.750" thick, 6" wide per secution. Each T-lot is 2" apart, T-slot starts 1" from the edge.)
-Porter Cable Spindle 3.5 HP. Model 7518
-Router mount for porter cable 7518
- Set of 4 toggle clamps with mounting brackets to mount to T-slot table.
-3 Amana bits model #'s AT-45426 (1/2" CNC Straight Plunge Router Bits
The New Generation of Straight Bit Technology
• New generation of high wear outstanding carbide
• New superior geometric design
• New advanced automatic grinding technology that improves the carbides' resistance to wear
• Super clean cuts
• 200% longer life time even when working with abrasive materials
• Cost effective
• AT-46241 ( 1/8" Solid Carbide - 2 Flute
Specially designed for speed and finish when working with solid hard woods. The combination of acute spiral flute shear angles with face ground helix yield high feed rates, fast plunge action, quick direction changes, deep penetration and mirror finish.
•AT-46249 (1/4" Solid Carbide - 2 Flute
Specially designed for speed and finish when working with solid hard woods. The combination of acute spiral flute shear angles with face ground helix yield high feed rates, fast plunge action, quick direction changes, deep penetration and mirror finish.
-Mach2/3 Control Software and license. (Reads G-Code - Controls CNC). Window XP or 2000. Processor (1.00GHz) or greater. Memory 256MB DDR SDRAM. Hard Drive 20GB. USB. Parallel port on mother board or PCI slot. All background software to be removed from computer.
-Rhino CAD & Rhino CAM Software Package. 4.0
-Relay for 110V Router spindles. Used to turn on/off router via mach 2. G-Code M03 or M04. Plugs into new control box with relay output. Good use to know when the machine is done with program.
-PCI Card for parallel
-SETUP OF THE COMPUTER WITH MACH 3, CURRENT PROFILE AND LICENSE. COMPUTER WILL BE TESTED WITH MACHINE.
End of package items.
$10,792.00 (Reference #3511) Price subject to change without notice.
If you are in the need of options to be added or changed please call us at 714.999.1156.
Overview of machine options and features. Prices may vary for listed features. Package price may not include some items below.
Travel
or Cutting dimension:
X-39"
Y-24.5" Z-8"
Footprint
without motor:
Footprint
(overall size not including motors): 48" x
30" x 15"
Cut
Capacity/Material:
Plastic
Foam
Hard Wood, soft woods
Circuit
Board
Light
Aluminum
Jewelry wax
Corian
Carbon Fiber
Machine Dimensions
with motor:
Footprint
with the motors 54"L x 30" W x 32" H
Frame
Features:
Structure
is CNC machined 6061 aluminum and extrusions
6061
Billet Machined Aluminum
Standard X and Y Axis uses 20mm ABBA Brand linear
rails/blocks (4 Blocks for X and 2 for Y)
Upgrade
only X and Y Axis uses 20mm THK Brand linear
rails/blocks (4 Blocks for X and 2 for Y). Must
be stated in the formal Quote. Now
available 5/4/2006
Pulley/Belt
Ratio
is 2:1 on X, Y and Z.
Pulley
made of Aluminum.
Belt
is reinforces fiber.
Z-Axis (Standard):
Up and down motion.
Linear
Hardened Shaft Guides
Linear
Bearings Blocks with grease inlet.
Rolled
Ballscrews .001" Backlash.
Resolution
.0001"
Recuirulating
ball nut with grease inlet.
Belt
Drive geared down for power and accuracy.
5"
Travel
Standard
X and Y Axis uses 20mm ABBA Brand linear rails/blocks
Upgrade
only X and Y Axis uses 20mm THK Brand linear
rails/blocks. Must be stated in the formal Quote. Now available
5/4/2006
Colombo spindles require upgrades to include additional
blocks and longer rails on Y Axis (24" travel
axis). and the Z axis. Now
available 5/4/2006
INCHES
METRIC
DECIMAL
mm
.00025"
.00635mm
.00050"
.0127mm
.001"
.0254mm
.003"
.0762mm
.006"
.1524mm
X and Y Ballscrew of .001" backlash tolerance. (Standard):
X, Y and Z Axis.
Rolled
Ballscrews of .001" backlash tolerance.
Resolution
.0001"
Precision
rolled hardened.
Recirculating
ball bearing Ball Nut.
Made
of steel.
Standard
ABBA rails and ballscrews.
Upgrade
at an additional price - Z Axis uses 20mm
THK Brand linear rails/blocks. Must be stated in
the formal Quote. Now
available 5/4/2006
INCHES
METRIC
DECIMAL
mm
.00025"
.00635mm
.00050"
.0127mm
.001"
.0254mm
.003"
.0762mm
.006"
.1524mm
Connectors
that comes with controller:
Parallel
Printer Cable for controls (Currently No USB)
USB
for additional 5W Power Only
Power
Cord for 110 VAC
International
Power Cord for 220 VAC (Please request)
Home Limit
Switches Details:
Comes
Standard.
Used
for Homing, Zeroing X, Y and Z.
Pre-Wired
Adjustable on X and Y
Requires
the purchase of Controller with limit switch option
Made
of micro switches
3 axis Linear Rail System Provides:
Comes
Standard.
Most
Accurate Cutting Z-Axis
Heavy
load
Sealed
High rigidity
Low axis motion noise
High durability
Low
maintenance
Dell
Computer, VisualMill and Mach 2 Details:
Computer
Requirements.
VisualMill
- Rhino
ArtCam
CAD/CAM Software
Mach
2 Control Software.
Window
XP or 2000
Processor
(1.00GHz) or greater.
Memory
256MB DDR SDRAM at
Hard Drive 20GB
USB
Parallel
port on mother board or PCI slot.
All background software to be removed from
computer.
CD,
Manual, Hard Key
Support
from VisualMill
Support
from Rhino CAM
Mach
2 and CAM soft must be on separate computers.
No
print instructions or manual thru K2
Mach
2 CD or download from Mach 2 site.
Set
Up is from K2 CNC
Support
from Mach 2
Mach
2 and CAM soft must be on separate computers.
Porter
Cable 892 - 2.25HP - NEW Tool Changing easier than
Hitachi (Single Tool Changer)
Porter
Cable 7518 - 3.25HP
NEW*
Bosch - 2.25hp - 1617 motor (3.5in diameter) - Please
make verbal or email request for this model.
Hitachi
2.25 HP - No longer available thru K2.
Makita
2.25 HP - No longer available thru K2.
Colombo
Spindle - Now Available. Ask a rep for details.
HSD - Now Available. Ask a rep for details.
Spindle
Router Mount Details:
Porter
Cable 690LR or 892 router (should fit most routers
with 3.5" round body)
Porter
Cable PC-7518 router 4.20inches in diameter.
NEW*
Bosch - 1617 motor (3.5in diameter)
Hitachi
(3.27 in diameter). Mount is available
Makita
(3.22 in diameter). Mount is available
Colombo
Spindle - Now Available. Ask a rep for details.
HSD - Now Available. Ask a rep for details.
Spindle
Dust hood Details:
Collects
dust
Fits
2.25" diameter hose.
Vacuum
and Hoses are NOT included
Collects
approximately 80% of cut debris
Cable
Carriers on X and Y Axis:
Neatly
confides motor , limit switches, and encoder wires
out of the way.
Igus design allows more wires to be added if needed by a snap through method.
Additional room for extension cord.
Table
Top Details:
T-Slot
Aluminum Table top size: 45" x 24" x .75" - T-Slotted
Table
Frame Legs:
Welded
mild steel (3 x 1.5 square tubing)
Painted Gray
Adjustments
on feet
Servo
Controller Details:
3
to 4 Servo Motors with feedback encoders.
Geckodrive
G320 servo controller
Close Loop
Wired for Step/Dir signals from Printer/Parallel
Port
Fully enclosed control box and pre wired for Parallel
Interface
110 (std.) or 220 (request) watts power supply.
24VDC unregulated (~30V) 8 Amps.
5
watt power input wire from 1 computer USB port.
Enable
button
Power
Cord
E-Stop Button
Relay output ON/OFF controlled by software and G-Code. (Requires relay hardware.)
HSD and COLOMBO are integrated into the control box.
1 extra Fuse
No
- Router E-Stop or remote off switch.
Mach
2 Controller software CD with purchase or download
demo from Mach 2 site.
Mach
2 Set Up is from K2 CNC with purchase
Support
is from Mach 2 or MAch 3 via email or phone.
1000
count per revolution.
Servo Motors:
X Axis
Y Axis
Z
Axis
Servo Motors
Strength
- 305 oz/in torque
US
Brand encoder
All
K2 Servo are Close Loop (FeedBack to the controller)
1000
count per revolution.
Servo Motors
Strength
- 305 oz/in torque
US
Brand encoder
All
K2 Servo are Close Loop (FeedBack to the controller)
1000
count per revolution.
8 inches of travel
1
Servo Motor DC Z axis
Strength
- 305 oz/in torque (NEW)
US
Brand encoder
All
K2 Servo are Close Loop (FeedBack to the controller)
1000
count per revolution.
Linear
Motion of X and Y Axis:
Standard
ABBA Rigid Rails
Rolled
Steel
Grease fittings.
Hi-Tolerance
Ball screws of .001 backlash tolerance available(
bearing house has a plastic dust cover )
On
a turn-key machine these are the options that you may
need as items to make your first cut. These items are
NOT included or available thru K2CNC.
Vacuum
Table - Not available thru K2
A
vise or Fixture to hold part - Not available thru
K2
Your
Cutting Program - Not available thru K2
Cutting
Tool (End Mill or Drill Bit) - Not available thru
K2
Support
includes:
Email
(Unlimited)
Phone
(Limited to set up and assembly of machine and controller)
Phone
(basic operation of the machine. Not to include
CAM programming)
Controller
support (Email from Mach2)
CAD/CAM Support (Email, Phone, Fax from Appropriate
vender)
On
site support is available at an additional charge.
Assembly:
Estimated
time of 20-30 minutes from time of placing the machine
on your table top.
Wires
pre-installed
Connect plugs into the control box
Connect Router to Extension Cord
Connect plugs to computer
Warranty:
12
Month on all parts that are defective.
12
Month on all servo, gecko, controller.
This
does not cover dust, water, user damage
Shipping
and Handling:
Requires
Palette Delivery
Typical
Company: UPS (United Parcel Services) Residential
or Business. Delivery to the door.
Palette
is made of 1/2 thick ply wood and 2x4.
$45
more for residence delivery
A
lift gate may be available upon request. Subject
to availability.
Total
weight: 190 LBS
Shipping
outside the US may need to have a different carrier
and method.
International
Shipping is available.
Returns:
15
days to return machine. Motors and controller can
be used but not damaged. 100% Money Back on machine,
motors, and controller less shipping and handling.
*
Prices, features, and specifications are subject to change without
notice.
Warranty
Policy: 12 Months on all parts that are defective.
Satisfaction Guarantee Policy: 15 days to return machine. Motors
and controller can be used but not damaged. 100% Money Back less shipping and
handling on machine, motors and controller.
Assembly:Some assembly required. Due to the constant improved
modifications to our machines, assembly instructions of all machines are provided
over the phone or by email only.
Shipping
price may vary, but is approximately $295 for this model for US
delivery. Residence delivery is $45 more. Shipping outside of
the US is available at additional charges. For outside of the
US shipping, please provide a full address when requesting a quote.
Shipping
container descriptions:
Typical Company: UPS Supply Chain Solutions (Freight company -
NOT regular UPS) Wooden Palette weighs 190 lbs, customer will
require two fit person to take off truck or have a forklift. KG-3925
Requires very small assembly.
