Features:
• Comes with 0.50 and .25 inch collet. If you need to hold on to .125" bits click here.
• Soft-starting, 12-amp motor featuring full-time electronic feedback (10,000 - 23,000 RPM)
• Motor transitions quickly between fixed base (included), plunge base (8931), and traditional spiral down bases (690 series)
• Release the motor, adjust bit height, and clamp the motor from above the router table with
• 3/16" hex socket (not included) or model # 75301 kit (not included)
• Auto-engaging spindle lock for single hand bit changes
• Handle-access, dual-position on/off switch with automatic bit-changing lock-"off"
• Macro-height lever for coarse adjustments and tool-less motor release
• Fine depth settings to 1/128" with micro-adjustment knob

Features:
• Comes with 0.50 inch collet.
• If you need to hold on to .125" bits click here.
• 15 Amps, AC only
• Electronic five-speed with soft start 10,000, 13,000, 16,000, 19,000, 21,000 RPM
• Maintains constant speed under load
• Maintains constant speed under load
• 1/2" collet
• Auto-release collet system ends "frozen" bits
• Unique design puts bottom bearing closer to work for minimum bit run-out and vibration
• Precision machined aluminum motor housing & base
• 100% sealed ball bearings
• $375 Purchase with machine only.

Features:
• 5.6 Amps, AC/DC
• 30,000 RPM
• 1/4" collet.
• Spindle lock
• Precision cast aluminum base
• Micro-set™ depth-of-cut adjustment knob
• 100% ball bearing construction

Features:
• Electronic speed control maintains constant speed even under load for smooth routing.
• If you need to hold on to .125" bits click here.
• Soft start feature for smooth start-ups.
• Quietest (81 dB) and lowest vibration router in its class.
• Rugged aluminum motor housing with small 3-1/4" diameter.
• Sub-base accepts industry standard template guides.
• Industrial cam-lock for fast and easy depth adjustment and removal of motor.
  
  This Router is discontinued for sale by K2. Mount still available.

Features:
• If you need to hold on to .125" bits click here.
• 11 Amp motor (2-1/4 Horsepower), for precise, controlled cuts
• 2-stage motor release clamp, for quick and accurate depth adjustments and base changes
• Nickel plated motor housing, for smooth depth adjustments
• Electronic speed control, maintains constant RPMs even as load varies
• Class leading noise level, only 79.5dB for a quieter workshop
  
  This Model is discontinued for sale by K2. Mount still available.
  

Features:
• 220 V
• External Fan (less noise)
• 18,000 RPM
• Comes with Driver
• ER 25 Collet
• Runout of 0.00025 inches
• 18 lb.
• Includes one ER 25 collet 1/2 inch diameter
• Includes a wrench
  
  We will add 4 bearing blocks and loner rails to accommodate the larger spindle.

Features:
• 220 V
• 24,000 RPM
• Comes with Driver/Inverter for 220V
• ER 25 Collet
• Runout of 0.00025 inches
• 18 lb.
• Includes one ER 25 collet 1/2 inch diameter
  
  We will add 4 bearing blocks and loner rails to accommodate the larger spindle.

Features:
• 220 V
• 18,000 RPM
• True 2.2 HP
• Comes with Driver/Inverter for 220V
• ER 25 Collet
• Runout of 0.00025 inches
• 18 lb.
• Includes one ER 25 collet 1/2 inch diameter
  
  We will add 4 bearing blocks and loner rails to accommodate the larger spindle.

Features:
• 220 V
• 18,000 RPM
• True 4 HP
• Comes with Driver/Inverter for 220V
• ER 25 Collet
• Runout of 0.00025 inches
• 20 lb.
• Includes one ER 25 collet 1/2 inch diameter
  
  We will add 4 bearing blocks and loner rails to accommodate the larger spindle.

3 qty combo- Made of Stainless steal, Made in the USA. Great for small engraving and detailed cutting in 3D parts in wood, plastic and other material. The 8 degree taper has a 0.00025 inch runout. This collet holder has a run out of 0.0005 to0 .002 inch at a length of the cutter extruded out .50 inches from the collet. ER-11 collets have more contact surface than an DA 300 collet providing more rigidity. This will work with technik collets also. K2 will be carrying Technik collets soon. The Porter Cable 0.500" collet /nut is NOT included.
**ER 11 collet (1/8) and Nut are included**

Uses:

Holds 1/8 bits. Some customer place different bits on the holder and keep the 1/2 collet on the router spindle. Allow for quicker change of tools.

Made of Stainless steal, Made in the USA. Design uses 32 pitch threads. Holds type DA 300 double angle collets. You should be able to buy collets locally. Great for small engraving and detailed cutting in 3D parts in wood, plastic and other material. This collet holder has a run out of +-.005 to .002 inch at a length of the cutter extruded out .50 inches from the collet. DA collets can not take too much load so this is not recommended for cutting aluminum. But I have not tested the system on aluminum.