(A-1)-KT-1414S-09.

New KT-1414-09 with 3 or 4 Axis Servo Options Powerful, Reliable, Fast .2" Pitch, Encoder Feedback, and Quite. Travel of (Y)14" x (X)14" x (Z)5.5" (Version 2009, Launching April 09) (Shaft linear motion, servo, and leadscrews) This Servo KT-1414S-09 has 20mm shafts, antibacklash nuts, wider 19 inch material capacity. Use the accurate machine to cut thin aluminum, plastics, and wood. The anti-backlash nut and the .200" pitch leadscrews provide accurate resolutions and is great for fine inlay work. The .200" pitch and high torque servo combo also provides great mechanical advantage when cutting hard woods and have been tested to cut .375" deep, at 70IPM, with a .375" diameter bit. With the right approach in your toolpaths, spindle, bits, accessories you can achieve results in milling that once required a $50,000 and more cnc machine. With the KT-1414S-09 you now can do this in your own garage, business, or anywhere with 110V outlet. Features: Standard 5 inches of clearance and 5.5 inches of travel. Servo Motors and controller 3 or 4 axis. Very quite motion on X, Y and Z axis. Strong, encoder feeback, fast .200" pitch leadscrews. Easy to assemble. 99% preassembled. Wider X axis clearance of 19 inches. In-line bearing arrangement on all axis for better longevity. 20mm shafts and bearing on al axis. All Axis uses Kert Lead screws and Kert Anti-backlash Nuts. Standard High Torque stepper on Z axis. Rubber feet. See upfront prices online. Scroll to bottom. I am ready to order, I'd like to get a quote. Contact K2 by Email Applications: MDF, Maple, Balsa, Corian, Circuit Board, Hard Wood, Plastic, non ferrous metals. Special misting, tools, proper feed rate, proper technique required if used to cut aluminum. Standard Features of the KT shaft models. X, Y and Z axis: K2 Servo Stronger than our 280 oz/in Steppers. 20mm shafts on all axis. Recirculating steel bearings on all axis. Direct drive coupler with anti-backlash. Precision K2 Exclusive aluminum extrusions providing smooth motion. 6061 aircraft grade aluminum. KERK Brand or BSA Brand Leadscrews and anti-backlash nuts on all axis. + 0.2 pitch lead screws. + 300 IPM Max Traverse default setting on Mach from K2. + 80 to 120 IPM Max recommended Feed Rate. + Backlash: 0.0005 inch + Resolution: 0.00025 inch INCHES METRIC DECIMAL mm .00025" .00635mm .00050" .0127mm .001" .0254mm .003" .0762mm .006" .1524mm Cable Carries Home switches. + Used for homing, reference all home. + Not used for limiting. K2 Servo Control Box + E-Stop + Relay Output + Fuse + Includes Cords. Machine Travel center of bit: + Travel: X=14" Y=14" Z=5" Clearance of part: + X=19" (side column clearance). + Y=20"or longer (table supports 20"). + Z=5" table top to Z bottom. + Z=5.75" No table to Z bottom. Footprint of machine: + Machine bottom X=22" Y=23" Z=24.5" + Machine top X=26" Y=25" Z=24" + with Motor top X=29" Y=28.5" Z=28" Available router mounts Trimmer router mounts Bosch Colt mounts + 35K max RPM, great for 1/8 bits. + Precision .0005" collect sold by K2CNC. Porter Cable 7310 mounts Kress mounts + 43.18mm (international type) + 1.7" Rioby Mount + 1.7" + 43.18mm RotoZip + 1.7" + 43.18mm 2 HP Router mounts Porter Cable 892 and 690 + 3.5" diameter, 11" circumference. + K2 recommends for 1/4 and 1/2 bits. Bosch 1617EVS + 3.5" Hitachi M12VC + 3.27" Mikita RD1101 + 3.20" - 3.22" Diameter. Dewalt DW616 + 3.5" Available routers sold by K2CNC Trimmer routers Bosch Colt mounts + 35K max RPM + Precision .0005" collect sold by K2CNC. 2 HP Router Porter Cable 892 and 690 + 3.5" diameter, 11" circumference. + Precision .0005" collect sold by K2CNC. Recommended Features of the KT models. Control Box 3 axis. + E-Stop + IO for Relay Gecko Drive Table top. + .75" thick + K2 brand + Mach 3 control software with profile. Buy a computer with PCI card and Mach3 installed or Drop ship yours for us to install Mach 3, ships with machine. Grease inlet upgrade. Available software for machine sold by K2CNC. K2 CNC machines works with all standard G-codes. CAD software (Computer Aided Design) RhinoCAD + Demo Downloadable + Parametric CAD + Art CAD with plugin RhinoArt VisualMill (Mecsoft) + Demo Downloadable + Use Visualmill for basic 2D and 3 D drawings. Vectics Carve + Demo Downloadable + Art CAD Vectics Cut 2D + Demo Downloadable + Art CAD Vectics Cut 3D + Demo Downloadable + Art CAD Vectics Aspire + Demo Downloadable + Art CAD CAM (Computer Aided Machining) RhinoCam or VisualMill (Mecsoft) VisualMill (Mecsoft) Vectics Carve + Demo Downloadable + Art CAD Vectics Cut 2D + Demo Downloadable + Art CAD Vectics Cut 3D + Demo Downloadable + Art CAD Vectics Aspire + Demo Downloadable + Art CAD AlibreCam made by Mecsoft. Available software for machine sold by 3rd party. K2 CNC machines works with all standard G-codes. CAD software (Computer Aided Design) Alibre + Demo Downloadable + Parametric CAD MasterCam + Parametric CAD and Art ArtCam + Art CAD Type3 KCDW Cabinet Software. Use Enroute for easy to use CAM. Enroute BobCAD-CAM Solidworks CAM (Computer Aided Machining) AlibreCam made by Mecsoft. + Parametric and Art CAM. MasterCam + Parametric and Art CAM. ArtCam + Art type of CAM Type3 Enroute Enroute BobCAD-CAM SolidCAM Optional items for the KT models. Aluminum table top. + T-sloted for versatility. On/Off relay for router. + Prolongs your router life. + Works with Mach 3. Toggle clamps. + Fast and strong clamping method. + Height of approximate 2". + Fits with K2 T-sloted top.. K2 low profile clamps. + Use with a dusthood to avoid crashing into the clamps. Colt precision collet. + Increase precision a run-out of . 003" or .005" to a .0005" run-out. Ground collets. Bits. 1/8th to 1/4. DustHood. Please call and ask for Ron + Fits Bosch Colt mounts + Fits Hitachi mounts + Fits Mikita mounts + Fits Dewalt mounts Brass 1/8th inch collet holders. + Holds 1/8th bits with better accuracy compared to off the shelf adapters. Assembly of Machine: At K2, we test the controller and tolerance prior to shipping out. It is important that our customers get up and running as soon as possible. Machine is assembled to 99% unless otherwise instructed by customer. Machine Warranty: One year on parts based on an 8 hours per day, 7 days per week operation. One year on labor at K2CNC location. Support: Email - unlimited. Phone - one basic set up - unlimited. K2 site - basic mach 3 up to 4 hours. Visualmill - basic understanding up to 1 hour. Crating and Handling: All machines are crated in a wooden pallet and is enclosed with plywood, 2x2 and 2x4. This ensures that your machine will ge there in one piece. All machines are insured. USA Shipping Estimates: UPS-SCS KT-1414 Location Zip Code Price Estimate New York 11104 175 Washington 98195 145 Michigan 48532 165 Arizona 85222 165 Arizona 85024 185 Florida 33176 158 Washington 98115 145 CA 93640 184 RI 2861 205 TX 77545 205 NY 11377 185 PA 19072 175 Arizona 85338 175 CO 80112 205 IL 61554 215 Utah 84050 220 World Wide Shipping Estimates: UPS-SCS KT-1414 Location Zip Code Price Estimate ON K1V7H8 258 QU j0k2n0 245 Canada G1K4B9 245 Canada T1W2V4 145 Italy NA 490 UK NA 758 Israel NA 738 Australia NA 815 Norway 4877 675 Melbourne Australia NA 645 Switzerland NA 775 Guadalajara 44230 445 Mexico 36400 645 Please email us and provide your full address and we will be happy to provide you a more accurate shipping charge. Click here to email us. Other Shaft Models: KTM-0704-09 3 Axis Steppers KTM-0704-09 4 Axis Steppers KTM-0704-09 3 Axis Servo KT-1414-09 3 Axis Steppers (Version 2009, Launching April 09) KT-1414-09 4 Axis Steppers KT-1414-09 3 Axis Servo KT-1414-09 4 Axis Servo KT-2514-09 3 Axis Steppers (Version 2009, Launching April 09) KT-2514-09 4 Axis Steppers KT-2514-09 3 Axis Servo KT-2514-09 4 Axis Servo KT-3614-09 3 Axis Steppers (coming soon) KT-3614-09 4 Axis Steppers (coming soon) KT-3614-09 3 Axis Servo (coming soon) KT-3614-09 4 Axis Servo (coming soon)

1414-9FR-SERVO:	Please Select...Frame and 3 axis Servo Control Box, 3 Motors, Wires, Cable Carriers. Frame and 4 axis Servo Control Box, 3Motors, 3 Wires, Cable Carriers. (+$180.00) Frame and 4 axis Servo Control Box, 4 Motors, 3 Wires, Cable Carriers. (+$300.00)
1414-9AL-750:	Please Select...Aluminum table top, 6061 AL, 0.75" thick, 2" rows of t-slots for 1/4-20 nuts or inverted bolts. (+$225.00) None
Spindle Router:	Please Select...Bosch Colt 35K max RPM, 1/4 max collet, precision collet .0004" at extra cost. (+$150.00) Porter Cable 892 - K2 recommends for 1/4 to 1/5 bit capacity. (+$220.00) Porter Cable 7310 laminate trimmer (+$120.00) None
Router Mounts (2514 and 1414):	Please Select...Bosch Colt, 35K max RPM, Great for 1/8 bits. (+$54.95) PC Trimmer 7310 (+$54.95) PC 892 - K2 recommends for 1/4" and 1/2" bits. (+$59.95) Hitachi M12VC (+$59.95) Mikita RD1101 (+$59.95) DeWalt DW616 (+$59.95) None
Software_CAD (designing & drawing):	Please Select...Rhino CAD (+$700.00) Rhino CAD and CAM (+$1,700.00) VisualMill 6.0 (+$1,000.00) Vectric - VcarvePro *pick "None" on CAM** (+$599.00) Vectric - Cut2D *pick "None" on CAM** (+$149.00) Vectric - Cut3D *pick "None" on CAM** (+$299.00) Vectric - PhotoVacrve *pick "None" on CAM** (+$149.00) Vectric - Aspire *pick "None" on CAM** (+$1,999.00) Alibre - Have a rep call me. (+$1,200.00) Enroute - Have a rep call me. *pick "None" on CAM** (+$2,500.00) MasterCam - (CAD & CAM). 2D Have a rep call me. *pick "None" on CAM** (+$5,500.00) MasterCam - (CAD & CAM). 3D Have a rep call me. *pick "None" on CAM** (+$8,500.00) Art Cam - (CAD & CAM). Have a rep call me. *pick "None" on CAM** (+$7,500.00) None I currently have a CAD Software.
Software CAM (Tool paths control) - G-Code Generator:	Please Select...Rhino CAM (+$895.00) VisualMill Basic 6.0 (+$895.00) None - I already have ownership of a CAM software. None - I've selected a software that provides both CAD/CAM.
Software_Control (Controls the Machine):	Please Select...Mach 3 (includes set up, settings, and basis limited intro from K2) (+$199.00) Mach 3 profile only on CD - I own a full licensed version of Mach 3. (+$10.00) None
R-Relay:	Please Select...Relay for 110V Router spindles. Turns on/off router via mach 2. G-Code M03 or M04. (+$150.00) None
TOOL BITS:	Please Select...3 Ball Endmills. 1/2 HSS - 1/4 Carbide Ball, 1/16 Carbide Ball. (+$79.95) 3 Ball Endmills and 3 Flat End Mills. 1/2, 1/4, 1/16 Ball and 1/2, 1/4, and 1/8 Flat. (+$149.95) 3 Ball Endmills and Precision Collect Kit . 1/2 HSS, 1/4 Carbide Ball, 1/16 Carbide Ball. (+$240.95) 3 Ball Endmills, 3 Flat End Mills, and Precision Collet Kit. 1/2, 1/4, 1/16 Ball and 1/2, 1/4, and 1/8 Flat. (+$320.95)
Running Specials:	Please Select...Ask a K2 Rep. -2% off order less shipping and tax if paid by check or cash. All of 2010. 3% OFF any machine purchase over $5,000. Must mention AD. Good Until 8/15/10 5% OFF any machine purchase over $15,000. Must mention AD. Good Until 8/15/10
Shipping & Handling:	Please Select...USA West ($25 variation) (+$185.00) USA Med ($25 variation) (+$205.00) USA East ($25 variation) (+$225.00) Mexico ($25 variation) (+$625.00) Canada ($100 variation) (+$215.00) United Kingdom ($100 variation) (+$725.00) Itally ($100 variation) (+$525.00) Australia ($100 variation) (+$815.00) Guadalajara ($100 variation) (+$495.00) Switzerland ($100 variation) (+$775.00)
Acknowledgement:	Please Select...Prices and Specifications may change at any time. Quotes from K2 required to finalize sale.