(A-4)-KTS-4014S-09.

General 4th Axis set up   Pool Cue Tapper and Inlay General 4th Axis set up     New KTS-4014 Servo Combo. 40" x 14" of Travel. Longer Travel (X)40" x (Y)14" x (Z)5.5" Version 2009 Shaft linear motion servo motors and controller The new KTS-4014 was designed with the cue makers in mind. The machine has 20mm shafts, anti-backlash nuts, 19 inch material capacity. You can freely cut a length of 40". The long direction T-sloted table top allows for easy adjustment of the tail stock. the machine can accurately position 0.00035" and has a anitbacklash nut. Please call us for a quote. 714-999-1156 K2CNC Cutting Pool Cue Shafts from Ron Liboon on Vimeo.       Features: Standard 5 inches of clearance and 5.5 inches of travel. Easy to assemble. 99% preassembled. Wider X axis clearance of 19 inches. In-line bearing arrangement on all axis for better longevity. 20mm shafts and bearing on al axis. All Axis uses Kert Lead screws and Kert Anti-backlash Nuts. Rubber feet. Additional Applications: MDF, Maple, Balsa, Corian, Circuit Board, Hard Wood, Plastic, non ferrous metals. Special misting, tools, proper feed rate, proper technique may be required if used to cut aluminum and other non ferrous metals. Standard Features of the this frame. X, Y and X axis: Servo Motors. 20mm shafts on X and Z Only. 16mm shafts on 40" travel axis Y. Recirculating steel bearings on all axis. Direct drive coupler with anti-backlash on X and Y axis. Precision K2 Exclusive aluminum extrusions providing smooth motion. 6061 aircraft grade aluminum. Anti-Backlash Nuts on all axis. + .500" Diameter on X and Z + .625" Diameter on Y + 0.2 pitch lead screws. + 14" Axis 250 - ipm Max recommended Traverse. Default setting on Mach from K2. + 40" Axis 100 ipm Max Traverse. Default setting on Mach from K2. + 80IPM Max recommended Feed Rate + Backlash: 0.00025 inch + Resolution: 0.00035 inch INCHES METRIC DECIMAL mm .00025" .00635mm .00050" .0127mm .001" .0254mm .003" .0762mm .006" .1524mm   Cable Carries   Home switches. + Used for homing, reference all home. + Not used for limiting.   Machine Travel center of bit: + Travel: X=40" Y=14" Z=5" Clearance of part: + X=47"or longer (table supports 30"). + Y=19" (side column clearance). + Z=5" table top to Z bottom. + Z=5.75" No table to Z bottom. Footprint of machine: + Machine bottom X=47" Y=35" Z=24.5" + Machine top X=47" Y=35" Z=24" + with Motor top X=53" Y=38.5" Z=28" Table Top: + X=47"or longer (table supports 30"). + Y=19" (side column clearance). Available router mounts Trimmer router mounts Bosch Colt mounts + 35K max RPM, great for 1/8 bits. + Precision .0005" collect sold by K2CNC. Porter Cable 7310 mounts Kress mounts + 43.18mm (international type) + 1.7" Rioby Mount + 1.7" + 43.18mm RotoZip + 1.7" + 43.18mm 2 HP Router mounts Porter Cable 892 and 690 + 3.5" diameter, 11" circumference. + K2 recommends for 1/4 and 1/2 bits. Bosch 1617EVS + 3.5" Hitachi M12VC + 3.27" Mikita RD1101 + 3.20" - 3.22" Diameter. Dewalt DW616 + 3.5" Available routers sold by K2CNC Trimmer routers Bosch Colt mounts + 35K max RPM + Precision .0005" collect sold by K2CNC. 2 HP Router Porter Cable 892 and 690 + 3.5" diameter, 11" circumference. + Precision .0005" collect sold by K2CNC. Recommended Features of the KT models at an additional charge. These are sold outside of this auction and is to be paid separately. Control Box 3 axis Stepper or servo. + E-Stop + IO for Relay Gecko Drive Table top. + .75" thick + K2 brand + Mach 3 control software with profile. Buy a computer with PCI card and Mach3 installed or Drop ship yours for us to install Mach 3, ships with machine. Grease inlet upgrade. Available software for machine sold by K2CNC. These are sold outside of this auction and is to be paid separately. K2 CNC machines works with all standard G-codes. CAD software (Computer Aided Design) RhinoCAD + Demo Downloadable + Parametric CAD + Art CAD with plugin RhinoArt VisualMill (Mecsoft) + Demo Downloadable + Use Visualmill for basic 2D and 3 D drawings.   Vectics Carve + Demo Downloadable + Art CAD Vectics Cut 2D + Demo Downloadable + Art CAD Vectics Cut 3D + Demo Downloadable + Art CAD Vectics Aspire + Demo Downloadable + Art CAD CAM (Computer Aided Machining) RhinoCam or VisualMill (Mecsoft)   VisualMill (Mecsoft)   Vectics Carve + Demo Downloadable + Art CAD Vectics Cut 2D + Demo Downloadable + Art CAD Vectics Cut 3D + Demo Downloadable + Art CAD Vectics Aspire + Demo Downloadable + Art CAD AlibreCam made by Mecsoft.   Available software for machine sold by 3rd party. K2 CNC machines works with all standard G-codes. CAD software (Computer Aided Design) Alibre + Demo Downloadable + Parametric CAD MasterCam + Parametric CAD and Art ArtCam + Art CAD   Type3   KCDW Cabinet Software. Use Enroute for easy to use CAM.   Enroute   BobCAD-CAM   Solidworks     CAM (Computer Aided Machining) AlibreCam made by Mecsoft. + Parametric and Art CAM.   MasterCam + Parametric and Art CAM.   ArtCam + Art type of CAM   Type3   Enroute   Enroute   BobCAD-CAM SolidCAM   Optional items for the KT models. These are sold outside of this auction and is to be paid separately. Aluminum table top. + T-sloted for versatility.   On/Off relay for router. + Prolongs your router life. + Works with Mach 3.   Toggle clamps. + Fast and strong clamping method. + Height of approximate 2". + Fits with K2 T-sloted top..   K2 low profile clamps. + Use with a dusthood to avoid crashing into the clamps.     Colt precision collet. + Increase precision a run-out of . 003" or .005" to a .0005" run-out. Ground collets. Bits. 1/8th to 1/4. DustHood. Please call and ask for Ron + Fits Bosch Colt mounts + Fits Hitachi mounts + Fits Makita mounts + Fits Dewalt mounts Brass 1/8th inch collet holders. + Holds 1/8th bits with better accuracy compared to off the shelf adapters.   Assembly of Machine: At K2, we test the controller and tolerance prior to shipping out. It is important that our customers get up and running as soon as possible. Machine is assembled to 99% unless otherwise instructed by customer. Machine Warranty: One year on parts based on an 8 hours per day, 7 days per week operation. One year on labor at K2CNC location. Support: Email - unlimited. Phone - one basic set up - unlimited. K2 site - basic mach 3 up to 4 hours. Visualmill - basic understanding up to 1 hour. Crating and Handling: All machines are crated in a wooden pallet and is enclosed with plywood, 2x2 and 2x4. This ensures that your machine will ge there in one piece. All machines are insured. USA Shipping Estimates: UPS-SCS Please Add $35 for residence. Prices and specifications subject to change without notice. Not responsible for typographical errors. Machine shown with optional equipment. KTS-4014 Combo Location Zip Code Price Estimate New York 11104 225 Washington 98195 205 Michigan 48532 225 Arizona 85222 225 Arizona 85024 155 Florida 33176 228 Washington 98115 215 CA 93640 245 RI 2861 265 TX 77545 265 NY 11377 265 PA 19072 225 Arizona 85338 265 CO 80112 265 IL 61554 285 Utah 84050 285     World Wide Shipping Estimates: UPS-SCS Please Add $35 for residence. Prices and specifications subject to change without notice. Not responsible for typographical errors. Machine shown with optional equipment. KTS-4014 Combo Location Zip Code Price Estimate ON K1V7H8 330 QU j0k2n0 330 Canada G1K4B9 330 Canada T1W2V4 245 Italy NA 645 UK NA 850 Israel NA 850 Australia NA 905 Norway 4877 775 Melbourne Australia NA 795 Switzerland NA 875 Guadalajara 44230 545 Mexico 36400 745       Please email us and provide your full address and we will be happy to provide you a more accurate shipping charge. Click here to email us.

4014-9FR-SERVO:	Please Select...Frame and 3 axis Servo Control Box, 3 Motors. Frame and 3 axis Servo Control Box, Lathe (+$750.00) Frame and 4 axis Servo Control Box, 3 Motors. (+$165.00) Frame and 4 axis Servo Control Box, 3 Motors. Lathe. No Rotary Table (+$850.00) Frame and 4 axis Servo Control Box, 4 Motors. (+$300.00) Frame and 4 axis Servo Control Box, 4 Motors. Lathe and Rotary Table (+$1,300.00)
4014-AL-750:	Please Select...Aluminum table top, 6061 AL, 0.75" thick, 2" rows of t-slots for 1/4-20 nuts or inverted bolts. (+$425.00) None
Spindle Router:	Please Select...Bosch Colt 35K max RPM, 1/4 max collet, precision collet .0004" at extra cost. (+$150.00) Porter Cable 892 - K2 recommends for 1/4 to 1/5 bit capacity. (+$220.00) Porter Cable 7310 laminate trimmer (+$120.00) None
Router Mounts (2514 and 1414):	Please Select...Bosch Colt, 35K max RPM, Great for 1/8 bits. (+$54.95) PC Trimmer 7310 (+$54.95) PC 892 - K2 recommends for 1/4" and 1/2" bits. (+$59.95) Hitachi M12VC (+$59.95) Mikita RD1101 (+$59.95) DeWalt DW616 (+$59.95) None
Software_CAD (designing & drawing):	Please Select...Rhino CAD (+$700.00) Rhino CAD and CAM (+$1,700.00) VisualMill 6.0 (+$1,000.00) Vectric - VcarvePro *pick "None" on CAM** (+$599.00) Vectric - Cut2D *pick "None" on CAM** (+$149.00) Vectric - Cut3D *pick "None" on CAM** (+$299.00) Vectric - PhotoVacrve *pick "None" on CAM** (+$149.00) Vectric - Aspire *pick "None" on CAM** (+$1,999.00) Alibre - Have a rep call me. (+$1,200.00) Enroute - Have a rep call me. *pick "None" on CAM** (+$2,500.00) MasterCam - (CAD & CAM). 2D Have a rep call me. *pick "None" on CAM** (+$5,500.00) MasterCam - (CAD & CAM). 3D Have a rep call me. *pick "None" on CAM** (+$8,500.00) Art Cam - (CAD & CAM). Have a rep call me. *pick "None" on CAM** (+$7,500.00) None I currently have a CAD Software.
Software CAM (Tool paths control) - G-Code Generator:	Please Select...Rhino CAM (+$895.00) VisualMill Basic 6.0 (+$895.00) None - I already have ownership of a CAM software. None - I've selected a software that provides both CAD/CAM.
Software_Control (Controls the Machine):	Please Select...Mach 3 (includes set up, settings, and basis limited intro from K2) (+$199.00) Mach 3 profile only on CD - I own a full licensed version of Mach 3. (+$10.00) None
R-Relay:	Please Select...Relay for 110V Router spindles. Turns on/off router via mach 2. G-Code M03 or M04. (+$150.00) None
Running Specials:	Please Select...Ask a K2 Rep. -2% off order less shipping and tax if paid by check or cash. All of 2010. 3% OFF any machine purchase over $5,000. Must mention AD. Good Until 8/15/10 5% OFF any machine purchase over $15,000. Must mention AD. Good Until 8/15/10
Acknowledgement:	Please Select...Prices and Specifications may change at any time. Quotes from K2 required to finalize sale.